DIY 2014 991 Front Bumper Cover Removal PART 2
#1
DIY 2014 991 Front Bumper Cover Removal PART 2
DIY - 2014 991 Front Bumper Cover Removal
PART 2
Go to PART 1
Now simply just start pulling the bumper assembly from the body... You pull straight away from the front of the car, and it does slide easily. I was surprised at how easy this was! No worries- it won't just fall to the ground or anything. To be safe I put a piece of carpet underneath.
And BOOM! You have your bumper removed!!!
I put it down gently on a piece of carpet. Some of you may want to "tape" and all that stuff. I was just careful. Also -- this is not a two-man job by any means. It is super-light and easy to hold steady from the center.
Here are some shots of the front-end with the bumper and lights removed...
And here are some shots looking at more detail inside the bumper, specifically at the radiator openings....
And for those interested in what is behind the center plastic plug on our 991 bumper covers (at least for those without the third radiator / x51 kit!):
And that is it! For those interested, visit my DIY - Radiator Mesh Grill Install (coming soon!)
Have fun!!!
Last edited by plenum; 05-14-2014 at 06:02 AM. Reason: Fixed typo
Thread
Thread Starter
Forum
Replies
Last Post
vividracing
Nissan GTR
0
08-19-2015 02:11 PM