993 TurboThis community is about the last air cooled twin turbocharged Porsche 911. Model year 1996 - 1997. Also inclusive in this forum is talk on the final 182 Porsche 911 Turbos built in 1997 known as the Turbo S.
Welcome to 6SpeedOnline.com!
Welcome to 6SpeedOnline.com.
You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, join 6SpeedOnline.com today!
Sorry I know its been a month of Sundays since this post started; however, I'm interested on how your able to control the A/C and numerous accessories with the AEM. Do the accessories run independent body modules? Awesome job BTW, there is nothing like the feeling of accomplishment when a project goes as planned and is totally done by youself.
Sorry I know its been a month of Sundays since this post started; however, I'm interested on how your able to control the A/C and numerous accessories with the AEM. Do the accessories run independent body modules? Awesome job BTW, there is nothing like the feeling of accomplishment when a project goes as planned and is totally done by youself.
Thank you for the compliments. The heat, A/C, cruise control, gauges, etc, all run independently without the need of the stock ecu, the beauty of working with an older car.
__________________
1995 993
Custom single turbo setup
412 RWHP/351 RWTQ
any possibility of you having the original wiring harness hanging around?
I am looking to do a 964 project based on the 993 motronic and I need the complete wiring harness and MAF.
any possibility of you having the original wiring harness hanging around?
I am looking to do a 964 project based on the 993 motronic and I need the complete wiring harness and MAF.
thx
Colin
Thanks,
I may have the original engine bay harness around somewhere. I did replace just the engine bay engine harness with a new stock one as the original had deteriorated quite a bit. You can get a new engine harness for under $100, but if I still have it I will gladly sell you my old used one for dirt cheap.
I believe you are looking for the entire harness all the way back to the ECU though. I did not replace that as I just built a small jumper harness to adapt the AEM to the stock harness plug so that it uses all the existing wiring in the car. I do have the stock MAF which is in perfect condition that I can sell you. Shoot me a pm if you are interested.
Quote:
Originally Posted by Dan
Wow.. this is one hell of a project... You have done a phenomenal job! It looks amazing
Thanks!
__________________
1995 993
Custom single turbo setup
412 RWHP/351 RWTQ