996 Turbo / GT2Turbo discussion on previous model 2000-2004 Porsche 911 Twin Turbo and 911 GT2. Sponsored By Vivid Racing
Welcome to 6SpeedOnline.com!
Welcome to 6SpeedOnline.com.
You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, join 6SpeedOnline.com today!
I would think that the extra 90-100rwhp would give the ZR1 a distinct edge from a roll.
What speeds were used for the roll runs?
Keep in mind that the ZR1 also weighs approx 200 lbs more than a Z06. That blower kit and the larger wheels/tires add weight. Z06 has 18/19, ZR1 has 19/20.
A Z06 with intake, exhaust, tune is pushing 485-490 rwhp. That is about 550 crank HP.
This ad is not displayed to registered and logged-in members. Register your free account today and become a member on 6SpeedOnline!
__________________
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
2010 Audi S5 convertible | 2010 Camaro SS | 2009 Cadillac CTS-V | 2009 Corvette Z06 | 2006 Viper Coupe | 1970 Chevelle SS 454 | 1969 Camaro SS convertible
Forgot to mention that a buddy owns that particular ZR1 in the video. He had it at our local hang-out last Sat. It looks awesome in Cyber-gray with the blue accents.
Hopefully I'll be able to convince him to get a couple runs with me on video.
Keep in mind that the ZR1 also weighs approx 200 lbs more than a Z06. That blower kit and the larger wheels/tires add weight. Z06 has 18/19, ZR1 has 19/20.
A Z06 with intake, exhaust, tune is pushing 485-490 rwhp. That is about 550 crank HP.
True, true, forgot about the weight difference and mods.
A drop of water has nothing on me
when it comes to being shallow! To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
Great dicussions guys. But I think at higher speeds ZR1 will pull away from Z06 stock. High HP shows more at higher gears. Crazy though that bone stock Z06 has better times at 1/4. After I'm done also, I have one race set with a ZR1 also
__________________ B9R BBi 996tt .....Tx Mile Oct. 2009=221.212mph
60-130=4.25 sec.
Great dicussions guys. But I think at higher speeds ZR1 will pull away from Z06 stock. High HP shows more at higher gears. Crazy though that bone stock Z06 has better times at 1/4. After I'm done also, I have one race set with a ZR1 also
It will absolutely pull away from a stock Z06 at higher speeds. Especially considering its close-ratio 5th and 6th gears. But a bolt-on Z06 will still give it a heck of a run up to 140 mph.
Good question Walnut. I think the ZR1 and 996tt weigh about the same. I don't know which one has a lower cd nor do I know which has better gearing. I do believe that both are producing around 650 crank hp and that an awd Porsche may have an advantage out of the hole. It seems that the 18gs have been trapping a few mph faster but then that's the first and only ZR1 I've seen run so far.
__________________ Something new is brewing....(insert monster laugh here)
Protomotive K24/18g 650 - gone but not forgotten
Linear Mode
