I hope ur right how low are you? Im 107mm in the front 122mm in the rear with Michelin 315's I dont think i can fit 10mm rear spacers without rolling but ill give it a go.

 

No strange handling

 

Just to share my experience so it may help.
I have 19" 997 wheels 235/40-19 F, 315/25-19 R.


I read that the recommended spacers for using these wheels on a 996tt were 7mm F, 15mm R.


I tried 7mm F, and 15MM R, they seemed to fit fine, but the front tires looked like they could come out a little to match the rear.


Now I have 15mm on all four corners, and they look good with no rubbing on stock suspension. I suspect if I was to lower the car 1", on full lock the front tires might rub the plastic fender liners where they protrude back towards the tires a little.

 

315's will be the difference probably. I'm still on 295's will measure height later

 

Its the 315s for sure when i had 295s i ran 15mm rear spacers

 

Hound what size spacers do you use if any?

 

I don't use any spacers Tim. I have the wheels cut at the offset for my specific set up.

 

^Exactly what he said!

 

Thanks Hound just wondered

 

Hi All,
What brand / where to buy 15mm spacers? I have 12mm in the rear now. I think I'll keep the 12's in the rear in case I go with a wider tire. I'm ~ 1.25" lower than stock ride height as well....15mm fronts should still work correct? Do the 15mm spacers come with longer bolts/hardware? TIA!
Scot

 

Ive bought a couple sets of spacers from Adaptec, they are a sponsor here. They will make them whatever size you want.

 

I have a question for the members whom runs 7mm/15mm wheel spacers. Does it required longer lug nuts or is fine with the original lug nuts?

Thanks~

 

longer bolts

 

thanks!!