Looking to do the fister d exhaust. Any shop is la that has done it or what's the best way in Los Angeles?

 

pm sent.

 

Any exhaust shop should be able to do it, I took my exhaust off the car took it to a local exhaust shop with a picture of what it's supposed to look like and they did it no problem.

 

its a internal and external mod correct?

 

if you find a place please post it , I'm interested too

 

I have a set of PSE2 996 mufflers (the ones with the valves and extra 3rd pipe) for sale in the classifieds if your interested.

https://www.6speedonline.com/forums/...e-exhaust.html

 

BiteEmBBeatM, I'm curious, why are you selling your PSE's? It looks like you are doing some heavy mods. I have PSE and was curious.

 

Ask/search online to find exhaust shops that are known for doing custom fabrication work. I took my mufflers down to a local shop known for doing hot rod type work, $60 later my 996 sounds great. I took a few pictures printed out just to help them understand what I wanted. It's just a slightly bent piece of 2" stainless and a little welding, easy stuff for a good exhaust shop.

 

my understanding was they took some baffling out as well.. or is it just the added 2 inch?

 

Shucks...for the price, just send your cans to FisterD and have them do the modification. They know from experience what diameter of bypass to use and they stand behind their work. Since FisterD is located in NorCal, shipping back and forth is going to be inexpensive and fast also.


My $0.02.

 

Im going with a full build on my motor, and running a big single turbo setup with open pipes from the turbo and wastgate.

The PSE and factory cats have just been sitting in storage.

 

They add a curved section of 2" pipe between the inlet and outlet, essentially it is a partial bypass of the muffler.

 

The correct answer has been posted. Anyone with a muffler shop.