997 Turbo / GT22004–present Turbo discussion on the current model Porsche 911 Twin Turbo. Sponsored By SharkWerks, Inc
Welcome to 6SpeedOnline.com!
Welcome to 6SpeedOnline.com.
You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, join 6SpeedOnline.com today!
This ad is not displayed to registered and logged-in members. Register your free account today and become a member on 6SpeedOnline!
__________________
997 C4S Cab, with a K&N air intake, navi, bose, 6 speed, sport chrono,
i pod inter-grader, chrome tips, 3M bra, H.R.E C97's 19" 8.5F, 11.5R rear with michelin ps2. (P.C.A member)
Ducati 1098s with carbon fiber To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
996 Carrera Cab, Guards Red with H.R.E's 545R's 8.5F/10.5R. Sold
What are the pink and black wires attached to in the black plastic housing?
The pink and black wires to into the black plastic housing...at the base, they leave the plastic housing through a small opening out the side, where a coupling interface attaches to the wiring of the car to supply power.
__________________
07 997 Ruf Tuned Turbo
05 955 Cayenne Turbo - waiting for delivery
04 996 GT3 - sold, looking for replacement
02 996 Turbo - gone, but not forgotten
The pink and black wires to into the black plastic housing...at the base, they leave the plastic housing through a small opening out the side, where a coupling interface attaches to the wiring of the car to supply power.
Thanks. But I should have been more specific. I need to know what the end of the wires actually look like in addition to this 'coupling interface' as the wires on my fogs were cut and stripped of insulation (not by me). The 'coupling interface' is absent and would like to know what it looks like so I know exactly what I need to replace. Thanks again.
Thanks. But I should have been more specific. I need to know what the end of the wires actually look like in addition to this 'coupling interface' as the wires on my fogs were cut and stripped of insulation (not by me). The 'coupling interface' is absent and would like to know what it looks like so I know exactly what I need to replace. Thanks again.
I'll try and get a photo of it to you this weekend...
- bob
__________________
07 997 Ruf Tuned Turbo
05 955 Cayenne Turbo - waiting for delivery
04 996 GT3 - sold, looking for replacement
02 996 Turbo - gone, but not forgotten
Thanks. But I should have been more specific. I need to know what the end of the wires actually look like in addition to this 'coupling interface' as the wires on my fogs were cut and stripped of insulation (not by me). The 'coupling interface' is absent and would like to know what it looks like so I know exactly what I need to replace. Thanks again.
I hope this helps...
__________________
07 997 Ruf Tuned Turbo
05 955 Cayenne Turbo - waiting for delivery
04 996 GT3 - sold, looking for replacement
02 996 Turbo - gone, but not forgotten
It does! Thank you! Are the wires/connection at the bottom of the housing and housing itself one piece or do they come apart?
Pretty much one piece, although the two wires are coupled together with a grey connector at the bottom. Did someone try and rig up a HID system and strip the wires?
__________________
07 997 Ruf Tuned Turbo
05 955 Cayenne Turbo - waiting for delivery
04 996 GT3 - sold, looking for replacement
02 996 Turbo - gone, but not forgotten
Pretty much one piece, although the two wires are coupled together with a grey connector at the bottom. Did someone try and rig up a HID system and strip the wires?
So the grey connector does not separate from the black housing?
Linear Mode
