EVOMS Latest 997TT Project: 9000 RPM’s, 4.0L and 1100 HP. Details Inside

[Evolution MotorSports]

Originally Posted by imcarnuts I almost had to change underwear when Mike from AWE took me for a ride in their car. This would be "Depends" territory. That is NOTHING compared to what we have in store for 997TT owners. If you think you needed a "depends" after a ride in their car, you would need a truck load of depends to handle what would be flowing after a ride in this MONSTER. We have already built over 850 HP for the 997TT and well over 1100 HP for the 996TT and have proved the power and success on the street, track and drag strip. The new engine we have going together is just INSANE

This ad is not displayed to registered and logged-in members. Register your free account today and become a member on 6SpeedOnline!

[KA 997TT]

Originally Posted by Evolution MotorSports

That is NOTHING compared to what we have in store for 997TT owners. If you think you needed a "depends" after a ride in their car, you would need a truck load of depends to handle what would be flowing after a ride in this MONSTER. We have already built over 850 HP for the 997TT and well over 1100 HP for the 996TT and have proved the power and success on the street, track and drag strip. The new engine we have going together is just INSANE

Are you willing to race my H2 with your new monster? Cause i have a big monster guy... I will take you we just need to race head on

[Evolution MotorSports]

Originally Posted by KA 997TT

Are you willing to race my H2 with your new monster? Cause i have a big monster guy... I will take you we just need to race head on

I am waiting for the video of you running over the junk that you removed from your car.

[jnixon]

Is this kit a stroker kit or where do you get the increase in motor size without boring out the motor? Are the cylinder size that much thinner?

[Evolution MotorSports]

OK, we are starting to make some progress. We are getting ready to do the mock up assembly of the engine today. Here is where we are at thus far:

Engine case
- Perpared for our 12mm head stud conversion
- Shuffle Pinned
- Boat Tailed Case Webbing
Crankshaft
- See original post about the details
Connecting Rods
- Carrillo rods - custom length w/ wide mains
Pistons
- See original post about the details

Here are some pictures of the progress. More will follow.



Crankshaft Mockup


Crankshaft Mockup



Boat Tailed Case Webbing


Shuffle Pinned Case

[KA 997TT]

Originally Posted by Evolution MotorSports

I am waiting for the video of you running over the junk that you removed from your car.

Did you get my small gift? It does not compare to the one you sent me of course!!!

[KA 997TT]

Originally Posted by Evolution MotorSports

OK, we are starting to make some progress. We are getting ready to do the mock up assembly of the engine today. Here is where we are at thus far:

Engine case
- Perpared for our 12mm head stud conversion
- Shuffle Pinned
- Boat Tailed Case Webbing
Crankshaft
- See original post about the details
Connecting Rods
- Carrillo rods - custom length w/ wide mains
Pistons
- See original post about the details

Here are some pictures of the progress. More will follow.



Crankshaft Mockup


Crankshaft Mockup



Boat Tailed Case Webbing


Shuffle Pinned Case

My wife wanted to know if they make underwear with car parts pictures on them so she can get as much attention as i give this thread... I told her...

[Evolution MotorSports]

Originally Posted by KA 997TT

Did you get my small gift? It does not compare to the one you sent me of course!!!

I did. Thank You!!

[Turbo GT]

I am presently here at EVO helping John mock up the 4.0 project - it is and will be a work of art!!! - everything is top notch and will set the standard for everybody else - plus there are many other projects that relate to the 4.0 project as well but those will released at a later time Oh did i mention the....... Todd says that i can't talk about that yet

[KA 997TT]

Originally Posted by Turbo GT

I am presently here at EVO helping John mock up the 4.0 project - it is and will be a work of art!!! - everything is top notch and will set the standard for everybody else - plus there are many other projects that relate to the 4.0 project as well but those will released at a later time Oh did i mention the....... Todd says that i can't talk about that yet

Showing off...

[Evolution MotorSports]

Well John and Alex from Max RPM are working quicker than I can get the information posted. Here are some more pictures.







Here is something else new that we are installing. This is something that has been going on behind the scenes for over a year now. What better time to spill the beans than now

[joetwint]

F()cking Nuts!!!Can't wait to see this thing unleashed!

[robmd99]

Todd
Thanks for sharing the fotos! It is looking very impressive!

Robert

[Evolution MotorSports]

Thanks Joe and Rob. It is coming along nice. It will be interesting to see it all come together. If all things go as planed, it should be running by the end of October

[LUISGT3]

Can't wait to go for a drive.