After removing my turbos for an upgrade, I find myself needing to replace the coolant I lost when I removed all the water lines from the turbos.

Since I have never changed the coolant before on my turbo, I am looking for some insight and guidelines. I have factory coolant on hand.

 

If you are not at the mileage interval for a flush then you can just top off the coolant to the proper level

 

I just had fill mine after I replaced the radiators. The dealer said to go 50/50 coolant/water.

 

I'm doing the same thing tonight. How much oil are you adding (I didn't keep track how much came out...)?

 

I drained completely and did a oil change while upgrading the turbos. 8.5 quarts total