997.1 TT Build Take 3
#51
I'm putting in evoms cams, so they come pinned.
And here they go..... Cylinders, heads and cams are going on a journey.
And here they go..... Cylinders, heads and cams are going on a journey.
#53
Not yet. My studs/rods should be shipping out any day. I'll take some pics of the 12 mm stud conversion and the rods soon....
I'm anticipating the heads/cylinders to return to me about 6 weeks from now. The cams 6-8 weeks from now.
I'm anticipating the heads/cylinders to return to me about 6 weeks from now. The cams 6-8 weeks from now.
#55
It's just a generic engine stand. I drilled 2 holes in the stand engine mount for the top 2 studs and drilled out some aluminum rod I had laying around. Works perfect. I'm not big on specialty tools
I used a hydraulic table to drop the engine but it's much easier to take it apart on a stand.
I used a hydraulic table to drop the engine but it's much easier to take it apart on a stand.
#58
how are the stock rods looking?
__________________
#TeamAIM
997TT SilverSpool - 210.8 mph 1/2 Mile WR Apr 2019, 9.2 @ 168 mph 1/4 Mile Manual World Record , 3.15 60-130 mph , 2.72 100-150 mph , 1400whp E85
996TT SpoolBus - 204.6 mph 1/2 Mile 996TT WR Aug 2018, 9.5 @ 154 mph, 3.23 60-130 mph, 2.5 100-150 mph Manual Porsche World Record, 1400whp E85
997TT SlowBerry - 205.0 mph 1/2 Mile WR Nov 2018, 9.7 @ 170 mph 1/4 Mile , 3.2 60-130 mph , 2.4 100-150 mph , 1420whp E85
ESMOTOR | DO88 | TPC DSC | SYVECS | COBB | IPD | KLINE | XONA | AMS | ID | ERP | SACHS | TURBOSMART | CSF | DODSON |
#TeamAIM
997TT SilverSpool - 210.8 mph 1/2 Mile WR Apr 2019, 9.2 @ 168 mph 1/4 Mile Manual World Record , 3.15 60-130 mph , 2.72 100-150 mph , 1400whp E85
996TT SpoolBus - 204.6 mph 1/2 Mile 996TT WR Aug 2018, 9.5 @ 154 mph, 3.23 60-130 mph, 2.5 100-150 mph Manual Porsche World Record, 1400whp E85
997TT SlowBerry - 205.0 mph 1/2 Mile WR Nov 2018, 9.7 @ 170 mph 1/4 Mile , 3.2 60-130 mph , 2.4 100-150 mph , 1420whp E85
ESMOTOR | DO88 | TPC DSC | SYVECS | COBB | IPD | KLINE | XONA | AMS | ID | ERP | SACHS | TURBOSMART | CSF | DODSON |
#59
I'm not sure yet.... It's been a busy week. I hope to get the studs/rods out this week as I'm away this weekend. I'll post pics when they're out.
#60
Since i was a kid i loved taking things apart to see how they worked. Rebuilding was a hit and miss affair and i usually had bits 'spare' afterwards . Hope your garage is heated no fun getting cold fingers with fiddly jobs like this.