Dashclock added to my Panamera 4
#47
Hi guys,
Anyone got any updates on the mod? Intends to get it done. I've checked with my Porsche dealer, the center dash panel alone is $350!
Has anyone tried using 3585, which is a better fit for the panel?
Anyone got any updates on the mod? Intends to get it done. I've checked with my Porsche dealer, the center dash panel alone is $350!
Has anyone tried using 3585, which is a better fit for the panel?
#50
#52
thank you
will this fit directly and connect ?
Look at this on eBay
Dash Stop Watch Analog Clock 97064130110DAP OEM Porsche Panamera 970 2013-16
will this fit directly and connect ?
Look at this on eBay
Dash Stop Watch Analog Clock 97064130110DAP OEM Porsche Panamera 970 2013-16
#53
Any chance you can get us more info on where you got this clock? It looks really good!
#54
#55
I know it's an older thread, but I am getting ready to add the dash clock to my Panamera. Just figured I would try and add to it if it works out positively.
Here's where I am so far -
I got my harness from Porsche today $38.00 with PCA discount.
My clock is on it way, found a new one on Ebay for $100 shipped.
Clock housing for the dash Ebay $100 shipped
I am getting my information from https://rennlist.com/forums/cayenne-...harness-5.html this is the Cayenne forum so who knows if I am wasting my time or not. If the wiring is different I maybe out of luck.
Update 11/8/19 -
I did the install today, took 2 hours. The hardest part is removing the a/c vents for sure. I removed the trim from the vents and it made it a lot easier to see the clips. The passenger side vent is the easiest to start with, be patient. I removed the passenger side black (in my car) front dash panel first.
I trimmed down the factory harness to use only the clock wires, I also extended them in case I needed the extra length.
As soon as I turn the key on it recognized the clock, working perfectly.
Harness - Part# 981-612-692-00
Here's where I am so far -
I got my harness from Porsche today $38.00 with PCA discount.
My clock is on it way, found a new one on Ebay for $100 shipped.
Clock housing for the dash Ebay $100 shipped
I am getting my information from https://rennlist.com/forums/cayenne-...harness-5.html this is the Cayenne forum so who knows if I am wasting my time or not. If the wiring is different I maybe out of luck.
Update 11/8/19 -
I did the install today, took 2 hours. The hardest part is removing the a/c vents for sure. I removed the trim from the vents and it made it a lot easier to see the clips. The passenger side vent is the easiest to start with, be patient. I removed the passenger side black (in my car) front dash panel first.
I trimmed down the factory harness to use only the clock wires, I also extended them in case I needed the extra length.
As soon as I turn the key on it recognized the clock, working perfectly.
Harness - Part# 981-612-692-00
Last edited by ddx77; 01-18-2020 at 09:25 AM. Reason: spelling
Thread
Thread Starter
Forum
Replies
Last Post