6speed Technical Information forum This area is intended for members to post their technical questions that will be answered by anonymous experts posting as 411. Members may provide knowledge but sponsors are asked to not post in this forum.

958 oil fill port

Thread Tools
 
Rate Thread
 
Old Apr 30, 2016 | 09:54 PM
  #1  
Nixer's Avatar
Thread Starter
|
Registered User
Joined: Apr 2016
Posts: 50
From: Dallas, TX
Rep Power: 13
Nixer is infamous around these parts
958 oil fill port

Guys,
Can someone tell me where the oil fill port is on Cayenne 958. I can't seem to find it. 958 doesnt have the fill port on the pan..it's somewhere on the driver's side of the tranny I read somewhere...
 
Old May 8, 2016 | 03:43 PM
  #2  
lurchphil's Avatar
Registered User
Joined: Apr 2013
Posts: 27
Rep Power: 15
lurchphil is infamous around these parts
The fill port is located on the passenger side on top of the transmission. As I recall, it requires a hex head wrench to remove. A mirror will make locating it much easier. You can use a hand pump on the transmission fluid bottle to refill the transmission. Just be sure you replace exactly the amount that you remove.
Mine took about 6 liters.
 
Old May 12, 2016 | 08:25 AM
  #3  
Nixer's Avatar
Thread Starter
|
Registered User
Joined: Apr 2016
Posts: 50
From: Dallas, TX
Rep Power: 13
Nixer is infamous around these parts
Originally Posted by lurchphil
The fill port is located on the passenger side on top of the transmission. As I recall, it requires a hex head wrench to remove. A mirror will make locating it much easier. You can use a hand pump on the transmission fluid bottle to refill the transmission. Just be sure you replace exactly the amount that you remove.
Mine took about 6 liters.
Thanks! I used the drain port to fill per the workshop manual. Used garden sprayer and VAS6262/2 adapter. My car took about 5 liters cold fill.. I haven't found an infrared temperature reader to top off yet. I read that only PIWIS can read ATF temperature on 958..
 
Old Jul 20, 2016 | 11:55 PM
  #4  
jdubbya's Avatar
Registered User
Joined: Jun 2014
Posts: 913
From: Northwest
Rep Power: 56
jdubbya is a splendid one to beholdjdubbya is a splendid one to beholdjdubbya is a splendid one to beholdjdubbya is a splendid one to beholdjdubbya is a splendid one to beholdjdubbya is a splendid one to beholdjdubbya is a splendid one to behold
Originally Posted by Nixer
Thanks! I used the drain port to fill per the workshop manual. Used garden sprayer and VAS6262/2 adapter. My car took about 5 liters cold fill.. I haven't found an infrared temperature reader to top off yet. I read that only PIWIS can read ATF temperature on 958..


I'm kinda late to the party but a Durametric will also show the temp. You may actually be overfilling without checking it at operating temp.
 
Old Aug 25, 2016 | 08:53 PM
  #5  
Wacky's Avatar
Registered User
Joined: Aug 2016
Posts: 1
From: Ithaca, NY
Rep Power: 0
Wacky is infamous around these parts
958 ATF Used to Fill?

What ATF did you guys end up using in each of your fills?
 
Old Aug 25, 2016 | 09:26 PM
  #6  
lurchphil's Avatar
Registered User
Joined: Apr 2013
Posts: 27
Rep Power: 15
lurchphil is infamous around these parts
Motul Multi ATF About 6.5 quarts.
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Nixer
Cayenne 958
19
Feb 5, 2018 01:50 PM
Mark's997T
997 Turbo / GT2
7
May 3, 2016 01:04 PM
function12
Cayenne Turbo
3
Apr 30, 2016 03:06 PM
Dantas
Cayenne
0
Apr 30, 2016 08:55 AM
the_vetman
Automotive Parts & Accessories For Sale/Wanted
0
Apr 25, 2016 09:07 PM



You have already rated this thread Rating: Thread Rating: 0 votes,  average.


All times are GMT -6. The time now is 12:40 PM.