What offsets are you guys using on 19's
 

Following on from my other thread about fitting gt3rs wheels to my 996 gt2,

Im just trying to get an idea off what offsets you guys are using front and rear on your 19's and how they fill the arches out?


If possible some pictures would be good too :)

Thanks again!!

Andy

30 and 42 on 8.5J and 11J.....and if you are lowered you would also need a stiffer suspension and/or fender prep if you kick them out that far.

Andy,
Mine is not a GT2 so some of this may not apply. 19x8.5et43 r19x11.5et39. I dont think I am as low as stock GT2 ride height. I'm 25.5" to the fender lips on all corners and about a 1/2 tire to fender lip gap. The rear fender lips are rolled.
http://i193.photobucket.com/albums/z...t/P1010074.jpg
http://i193.photobucket.com/albums/z...t/DSC00061.jpg

I have cargraphic 19 inch,car not lowered:
Front: 9 x 19 ET 40
Rear: 11.5 x 19 ET 26
No rubbing but for the rear the ET of 26 is the max you can go.


http://i196.photobucket.com/albums/a...T0027Large.jpg