relocating the a/c control unit
guys,
is there a thread with a Do it yourself intruction guide ? i plan on putting in a touch screen nav system in my car next week when i get it back and the ac unit needs to go where the cd holder was... |
1 Attachment(s)
Originally Posted by STEVE KOJASEVIC
(Post 2751607)
guys,
is there a thread with a Do it yourself intruction guide ? i plan on putting in a touch screen nav system in my car next week when i get it back and the ac unit needs to go where the cd holder was... u just need the trim peice...real easy to do..espec since ull have the dash apart. just make sure you put enough slack on the wires on back and make sure everything is pluged in tightly Attachment 497110 |
Originally Posted by STEVE KOJASEVIC
(Post 2751607)
guys,
is there a thread with a Do it yourself intruction guide ? i plan on putting in a touch screen nav system in my car next week when i get it back and the ac unit needs to go where the cd holder was... http://www.renntech.org/forums/index...ation-install/ |
link isnt working
|
Originally Posted by STEVE KOJASEVIC
(Post 2751644)
link isnt working
Trying again just in case http://www.renntech.org/forums/index...=19074&hl=avic I tried to PM you the link but I don't have enough post yet:mad: If you search around on renntech and look for post by trieullionaire you should get there. It is a 13 page forum thread with lots of pictures. Or PM me an email and I will send the link to you if you want. Mike |
just an FYI u can google it and pix will show up...but i dont know y u need a guide ..i mean eveything is like lego peices with a few screws here and there (which are easy to see)..just start pulling , hard to screw things up IMO
|
^i figured as much but i dont want to have any surprises when i do it
|
Originally Posted by STEVE KOJASEVIC
(Post 2751698)
^i figured as much but i dont want to have any surprises when i do it
yah i know what u mean...but there wont be any on the dash part...ull see once u start taking stuff apart , that they tried to make it as easy and cheap as possable...explaning y they dont use to many screws mainly clips |
To move it to the very bottom you just unscrew it and move it apparently and then you will need this trim piece the thread says -> 996 552 339 00 That guy is also selling an install kit on eBay that appears to GREATLY simplify installation. Here's a linky to one of the kits http://cgi.ebay.com/99-02-PORSCHE-99...item33591055a2
If you want to install the AC controls higher up just below the DIN it requires some mods but nothing that souonded too bad. Apparently it was designed to fit in the bottom if you want but the shifter seems like it would get in the way to me... |
What's the mod to fit it in the upper bin of the lower console? I had wanted to do this but the AC control unit seems too tall to fit in the upper bin.
|
1 Attachment(s)
The face plate may be taller, but the bin size should be the same. Not a fan of the RUF interior. Stock 997 looks better.
|
Hey robert, what navigation is that? and what do you have to do to make it work?
TIA! joel |
I think am HVAC relocation Kit comes with a trim bezel and a harness extension.
|
i did a search and cant find anything
can someone link me to a site that shows how to relocate the HVAC unit ? |
Originally Posted by JoelPirela
(Post 2752830)
Hey robert, what navigation is that? and what do you have to do to make it work?
TIA! joel |
It looks different from the ones I've seen on 996's...
|
|
Geez if yuo guys keep this up I'm going to end up swapping in a Navi myself - argh!
|
All times are GMT -6. The time now is 09:11 AM. |
© 2024 MH Sub I, LLC dba Internet Brands