hi, is there an adjustment for the whole assembly when installing? the light seems to sit low in the space at the top, the light isn't flush with the body at the top of the fender... seems there should be an adjustment to correct this? thanks, kk

 

I know you can adjust the beam , but as far flush with the fender I think most of them are below the fender line on top if this is what you are referring to

 

When correctly installed, the assembly should be in the right place, but if you miss the tracks on the way in, I could see it sitting low. Just remove the whole assembly (it's easy) and reinsert making sure the two lower tabs align with the tracks. All the instructions are in the owner's manual.

 

thanks for the input, i have found how to adjust the whole assembly, there is a plate with the notches for the tabs and it has 3 nut washer adjustable thingys, my hi-tech description... but have adjusted them so that the whole assembly is flush, mo betta...