Just bought AMS waste gates for my K24/18g's...
 

I should get them by Monday, Any tips on the instal and setting cracking pressures to prepare myself?

I also bought the vivd racing carbon fiber air box and a durametric cable, Not sure how i have owned this car this long and not had a durametric. I bought a VAG cable before i even bought my S4 back in the day hehe

Ah bummer got a new set sitting in a box here....

man i wish i knew. I have been quietly waiting for a pair to pop up in the classifieds.

best way is with the mityvac. you will set each w/g to start to crack open at 14 psi. after each is set you need to check it at the n75 and ensure both are opening at the same time. ( having a friend helps!)

the ams w/g will need a small tube added to the line as the nipples on the w/g are larger. its all in the kit. tie wrap them so they don't pop off. also watch the arm don't get hung on the turbo as its adjustable at both ends.

btw i have the black air box complete with k&n filter that has been on the sale forum for a while!

I would start with 13 lb crack open point,,better to be on the conservative side..
What does your tuner say?
I have mine set at 12.5 with by present Protmotive tune and I peak at1.4 bars And with my prior EPL tune I peaked at 1.5 bars with same settings..
Good luck

I'm going to email tony at epl to ask.

Post some feedback on the CF air intake when you have it installed ... was it easy to do? any issues? any noticeable difference?

I will, I should receive it next week.