Which BOV/DV's are you mafless guys running??
Need to free up some space where the stock DV's mount so Im thinking about mounting a vent to atmosphere BOV on the Y pipe, first thoughts from my supra days are use an HKS ssqv as its low profile and easy to mount with a weldeable mounting flange available, I have to modifies a stock Y pipe for water meth anyway so its a pretty quick job, will the HKS be ok for twin GT28's on E85 @ 1.5 bar ?? What other choices are there??
|
Tial makes some very nice ones. You can also use your existing bypass if you wanted but might not look as nice.
|
Im liking the Tial one dude, thanks, ive bid on an SSQV cheap if I dont get it Ill prob go Tial.
|
I prefer the turbosmart over the tial - smaller, but flows as much easily.
|
LQQK are you running just the one or two of them? I may run my forged DVs and switch to something bigger later or run EFR turbos that have integral bypass. Since the EFR are on my radar I don't want to spend a ton on BOV if I can help it. Trying to be cost conscious as best I can for now as I've got other pricey stuff yet to do!
|
Forge DV's dumping to atmosphere.....
|
Originally Posted by Wealth Manager
(Post 4319408)
Forge DV's dumping to atmosphere.....
|
Originally Posted by BLKMGK
(Post 4319426)
Could you please post a link or a pic to a good shot of your engine bay? I've got the same DVs and am thinking I may plumb them like you apparently have. Your avatar pic is just too small to get a good look :p
|
Tials on the y pipe here but you can weld them into the I/c if you want more room
|
Originally Posted by Wealth Manager
(Post 4319437)
Pipe runs off the y pipe and connects to the Forge DV hose, angle the DV's outward and they stay there. I can get u a photo next week.
|
2 Attachment(s)
BLKMGC, here are a few quick shots......
|
Wealth mgr. - That's a pretty nice setup.
I am running dual greddy type rz somethings pre-intercooler just off the outlet of each turbo. That's about as big I could fit down there. I was going to run a single 50mm tial between the upper y-pipe but figured the dual BOVs before the ICs would be more responsive. :cool: |
Originally Posted by 03EvoIII
(Post 4320757)
Wealth mgr. - That's a pretty nice setup.
I am running dual greddy type rz somethings pre-intercooler just off the outlet of each turbo. That's about as big I could fit down there. I was going to run a single 50mm tial between the upper y-pipe but figured the dual BOVs before the ICs would be more responsive. :cool: I don't think that makes that big of a difference, plus my car is 3.9 Liter so responsiveness isn't really a problem. My Y pipe setup will probably change to a dual Tial BOV on the y pipe. |
I like what you did there! I think I may do the same thing and when/if I switch to EFR I'll use their internal bypass.
|
All times are GMT -6. The time now is 09:14 PM. |
© 2024 MH Sub I, LLC dba Internet Brands