6speedonline's official 60-130, 1/4 Mile, and Standing Mile list
Im having a real tough time keeping my car from spinning. I start at 40mph in 2nd gear and stomp it, once it hits full boost at around 50mph i spin to about 65mph. Best I can do with this method is 8.6 then got an 8.1 I am going to put my drag radials on next to see how I do. I did these runs tonite and forgot to put the damn chip back in
I will get some better runs in and submit the proper data shortly.
I will get some better runs in and submit the proper data shortly.Aaron
traction control off, tranny is stock, my TCU has most of the TQ limiters removed
Thats probably the reason for the wheel spin (TQ restrictions removed in lower gears). Who did your upgrades? Maybe try the drag radials like you planned, or maybe give it a shot starting in 3rd gear.
Aaron
Aaron
Last edited by VBOXKING; Nov 3, 2008 at 11:06 AM.
http://me-fx.de/dbscanner_b.zip
give it a try
I extended the last version to calculate quarter mile times also:
http://me-fx.de/dbscanner_b.zip
give it a try
http://me-fx.de/dbscanner_b.zip
give it a try

This was my one and only try at a 60-130, and it was actually unintentional. I was using my RacelogicBox at Eagle's Canyon Raceway for a PCA DE event. The have a 2000' backstraight where I'd been hitting 124, 125 before the flash, so I decided I'd push it as hard as I could coming out of the previous corner and go as long as I dared before getting on the brakes. It turns out I waited just a little too long because I wasn't able to get it slowed enough to make the 90 degree corner and went off at about 40 mph. Fortunately, there was no damage, but when I saw I'd hit 130, I knew I could submit it. Maybe I'll find a better location and try it again.






