My car is currently lowered to GT2 specs via Motons and i recently install H&R sways both front and rear with TRG drop links up front. The problem is, my front sway is hitting my control arms when going over small bumps and pot holes. I jacked the car up to take a look and the sway is sitting above the control arms a good 3/4" to an 1". I shortened the drop links as much as i could but am still having this problem. Any suggestions? Please advise! Thanks!!

 

Call Sharkey

 

So no ideas? Am i the only one who has dropped a Turbo down to GT2 height and run into a problem like this?

 

I had the same problem with the H&R's and I seemed to be the only one at the time. I was hitting in the rear. See my post. I called H&R and didn't get any resolve. The adjustable drop links solved the problem for me. Has you car ever been on a trailer, sometimes people tie the car down by the aluminum control arms and bend them.
https://www.6speedonline.com/forums/...ad.php?t=70600

 

My car is slammed to the ground with front and rear sways and I have never had this problem?

 

Did you call Sharkey yet?

Every car is different, some hit, some break the drop links, some have no problems.
Sharkey's guys do alot of these suspensions, call him.

I have also had problems, but I have a JIC, I am not set as low and I have different
drop links than you so I cannot tell you what would help on your car.

Good luck,

MK

 

mine hits on rear .. took it off have heard so many stories on broken drop links,, more research i guess...

 

woodster ya i know see alex .... will do so wed next...

 

Yah i actually talked with Alex yesterday but he doesnt have anything open until the end of the week.

 

Hm... Buddy what links are you using?

 

Ned, It must be your Sway, I'm running Motons and TRG Links with Stock Front Bar and it's ok, get the H&R of the front and leave it on the back. The Stock unit on the front is more than adequate.

 

Are you at GT2 ride height?

 

Off the top of my head, rear (wheel arch height) is exactly 25" and front is just below this

 

I did also measure at the correct points underneath car, but can't for the life remember, think front was 108

 

BTW Ned, the car is on rails!