6SpeedOnline - Porsche Forum and Luxury Car Resource

6SpeedOnline - Porsche Forum and Luxury Car Resource (https://www.6speedonline.com/forums/)
-   996 Vendor Classifieds (https://www.6speedonline.com/forums/996-vendor-classifieds-108/)
-   -   \ VF: Limited time only - all 996 superchargers price drop / (https://www.6speedonline.com/forums/996-vendor-classifieds/334330-vf-limited-time-only-all-996-superchargers-price-drop.html)

VF Engineering 04-15-2014 05:58 PM

\ VF: Limited time only - all 996 superchargers price drop /
 
23 Attachment(s)
Spring Cleaning time

To bring in this Spring Season we've reduced prices for ALL Porsche Superchargers
for a limited time only until 5-15-14

Less than 3 weeks left.


Act now and save.

Place a 10% deposit by credit card to secure your Special Price!!
No interest or Timelines to pay!


1999-2001 Porsche 996: Carrera 3.4
$8895 NOW---> $7995
  • 425 hp | 360 ft/lbs
  • 6.0 PSI
  • V3 Si-Trim Vortech supercharger
  • Air/water intercooler
  • ECU software flash
  • Optional Hex Flash OBD2 cable
  • VF Part# VFK12-01
  • +129hp and +102ft/lbs tq
https://www.6speedonline.com/forums/...ine=1397607803


2002-2005 Porsche 996: Carrera 3.6
$8895 NOW---> $7995
  • 470 hp | 360 ft/lbs
  • 6.0 PSI
  • V3 Si-Trim Vortech supercharger
  • Air/water intercooler
  • ECU software flash
  • Optional Hex Flash OBD2 cable
  • VF Part# VFK12-02
  • +150hp and +87ft/lbs tq
https://www.6speedonline.com/forums/...ine=1397607803



SHavis 04-16-2014 07:29 AM

I've been toying with the idea of a turbo kit. Any pro's or con's between turbo or supercharger?

Is meth injection suggested with this forced injection?

Cheers!

VF Engineering 04-16-2014 01:00 PM


Originally Posted by SHavis (Post 4092512)
I've been toying with the idea of a turbo kit. Any pro's or con's between turbo or supercharger?

Is meth injection suggested with this forced injection?

Cheers!

They really are 2 different worlds. With any Turbo setup there is typically more torque at a lower RPM, but it does come at a delay and all in 1 "chunk" technically speaking :)

The advantage of our supercharger is the ability to retain, some say enhance, the original throttle response and power delivery except with the feeling that your motor has increased it's displacement. Drivability and overall performance is much more refined after installing the supercharger and the 911's agility is maintained with predictable power delivery.

The supercharger is non-invasive to install, no extra mods needed, and all 100% bolt-on. With a turbo, reinforcements are typically installed and more invasive procedures with permanent modifications are required for a turbo setup.

The supercharger does not require meth injection and the only time, with any car or mod, we suggest using water/meth is if it is the very last possible modification required/needed. Tuning for water/meth is critical and any interruptions or failures with a water/meth can throw the entire system off. Our principle is to keep it simple.

If your goal is to build a straight line, drag-purpose car, then a turbo is a good option. If you want to keep your options open by keeping your 911 in factory-spec and still drive it on the street on a daily basis with an extra +155hp on tap, then the supercharger is your best bet.

VF Engineering 04-21-2014 02:38 PM

Thank you for everyone's orders! Less than 3 weeks left to reserve your kit with only 10% down and No Interest/Deadlines.

https://www.6speedonline.com/forums/...ine=1398112666

VF Engineering 04-25-2014 12:31 PM

End of the week bump. Thank you for everyone's inquiries/orders!

A lot of 997 owners have been asking, but since the kits/engines are very similar, the stock clutch will hold the added performance (mostly the Torque) with no issues. The only time we recommend upgrading your clutch is if you plan to do constant hard-launches from a standstill.

VF Engineering 04-29-2014 11:34 AM

1 Attachment(s)
Lots of orders and inquiries came in this weekend. Thank you everyone!
If you've yet to receive a reply, thank you for your patience. We are processing inquiries in the order they were received.

If you were one of the first to place your deposit in the first week and have not yet paid in full and had your kit shipped, your kit is now going through Final QC as seen below. We're motivated to keep S/C kits flying off the shelves. Call or email us today!

https://www.6speedonline.com/forums/...ine=1398792868

VF Engineering 05-01-2014 04:31 PM

Who wants +100hp?

Less than 2 weeks left. You can have it with a 10% deposit today!


All times are GMT -6. The time now is 11:58 AM.


© 2024 MH Sub I, LLC dba Internet Brands