Rear Speaker Upgrade
So I'm done upgrading the dash speakers. My original speakers were messed up and torn - probably due to age. Lots of DIY videos on it and I thank those who posted them.
Now the sound in front is excellent. I used Pioneer coaxials btw. I couldn't find a DIY on how to upgrade the rear speakers though. Tried searching here and Youtube but there's none :( Can anyone point me to the right DIY for these rear speakers pls? https://cimg7.ibsrv.net/gimg/www.6sp...e70fa508e1.jpg |
The rear speakers are the same size as the front dash speakers. You should find that installing the new speakers is a little easier than the dash speakers. Just make sure you follow the same DIY on reusing the frame and mounting the aftermarket speakers into the frame/grille assembly. And check polarity with a multimeter. The impedance is the same as the front dash speakers too. Good luck!
|
Originally Posted by b3freak
(Post 4773235)
The rear speakers are the same size as the front dash speakers. You should find that installing the new speakers is a little easier than the dash speakers. Just make sure you follow the same DIY on reusing the frame and mounting the aftermarket speakers into the frame/grille assembly. And check polarity with a multimeter. The impedance is the same as the front dash speakers too. Good luck!
|
Originally Posted by fullmetaljacket
(Post 4773308)
That's great news then b3freak, Thank you! You mean same 4 ohms and 4 inches (10cm) size right? I'll get on it right away then - cheers!
|
Originally Posted by b3freak
(Post 4773326)
Yep, just the same 4 ohm speaker. I just changed mine out. Don't expect a lot of bass from the little speakers but they work. hahaha
https://cimg8.ibsrv.net/gimg/www.6sp...ed6b275336.jpg |
Originally Posted by fullmetaljacket
(Post 4773331)
Thanks B3! No, I wont have any problem with bass back there haha! :)
https://cimg8.ibsrv.net/gimg/www.6sp...ed6b275336.jpg |
I did a little carpentry and made sure the box looked like it was flush mounted. Its not bolted - cant seem to find where to mount the bolts without drilling holes :-) Though, if I go on highways and long drives out of the city, I made sure the back rest secures the bass box.
https://cimg8.ibsrv.net/gimg/www.6sp...3f78b5c465.jpg My HU is a Pumpkin Android auto so I can run pretty much everything you can run on your Android smartphone like Spotify, Waze, Google maps, YouTube etc. I still use the orginal factory amp for all the original speakers: dash mids, door subs and rear mid speakers. https://cimg6.ibsrv.net/gimg/www.6sp...5266fc129a.jpg Sub box is powered by 2 amps in the front trunk where the old CD changer used to sit: an Alpine powering a pair of 8" Punch subs and the Sound Magus powering the 2 6" Rockford Fosgate subs. Not too much DB here, I just want to 'feel' the bass. I usually soften the music but increase the lower frequencies of the bass. https://cimg5.ibsrv.net/gimg/www.6sp...c0fd78c432.jpg I have a remote sub volume control mounted under the dash. I recently changed the front dash speakers to Pioneers and the next project will be the rear speakers - 4" 2 way coaxial Reference Infinity's which I've ordered right after you informed me that they are the same size and same way to install as the dash speakers. They're probably in transit as I write this. That's all I have. The sub box is pretty much all that was added into the existing system. Just trying to replace those old worn out Bose speakers to get better sound. |
Hey B3, I have a quick question for you. Ive just taken out the rear speakers and discovered that the tweeter terminals +/- are factory soldered on to the -/+ of the mid speaker terminals. Please take a look at the picture...
https://cimg2.ibsrv.net/gimg/www.6sp...d27fbdaf00.jpg Take a look at the negative tweeter wire going to the positive terminal of the mid speaker terminal. You can see the small + sign on top of the plug silo. This was not the case with the dash speakers where the tweeter positive goes to mid speaker positive and negative goes to negative. 1. Since these speakers have not been tampered with. Is this the way the rear speakers are supposed to be wired? 2. So do I even wire the tweeters or can the new coaxials tweeters do the job and handle the highs/treble? |
This was how the front dash speakers were wired. See the criss-crossed tweeter wires: positive goes to positive and negative goes to negative...
https://cimg6.ibsrv.net/gimg/www.6sp...266aa43790.jpg FRONT DASH SPEAKERS So which wiring connection is the RIGHT one??? |
Originally Posted by fullmetaljacket
(Post 4774372)
Hey B3, I have a quick question for you. Ive just taken out the rear speakers and discovered that the tweeter terminals +/- are factory soldered on to the -/+ of the mid speaker terminals. Please take a look at the picture...
https://cimg2.ibsrv.net/gimg/www.6sp...d27fbdaf00.jpg Take a look at the negative tweeter wire going to the positive terminal of the mid speaker terminal. You can see the small + sign on top of the plug silo. This was not the case with the dash speakers where the tweeter positive goes to mid speaker positive and negative goes to negative. 1. Since these speakers have not been tampered with. Is this the way the rear speakers are supposed to be wired? 2. So do I even wire the tweeters or can the new coaxials tweeters do the job and handle the highs/treble? 2. Remove old tweeter... your new coaxials will be better. Cheers, Bobby |
you went with a 4 inch speaker for those, 4-ohm, and did you need to do modifications to the cage around it to fit, or was it an easy swap? I am having the exact same issue, all 4 of mine are worn and 2 are blown. Time to replace, but the idiot who had the car prior just added 4 x 5.25 pioneer's in the doors, 2 on each side. So now the car has 8 speakers connected, 4 are blown and I want it all GONE. Just want to install something amazing. It has a nice double din pioneer i'll keep, so i'll add an amp most likely.
Thanks |
Thanks Bobby! Cheers!
|
Originally Posted by robkat
(Post 4776419)
you went with a 4 inch speaker for those, 4-ohm, and did you need to do modifications to the cage around it to fit, or was it an easy swap? I am having the exact same issue, all 4 of mine are worn and 2 are blown. Time to replace, but the idiot who had the car prior just added 4 x 5.25 pioneer's in the doors, 2 on each side. So now the car has 8 speakers connected, 4 are blown and I want it all GONE. Just want to install something amazing. It has a nice double din pioneer i'll keep, so i'll add an amp most likely.
Thanks So did the idiot modify the dash and rear cages for 5.25's? If thats the case then you can try taking out the 5.25's and replace them with 4" 4 ohm ones. However, it depends on how the former owner modified the cage. He might have dremmeled for the 5.25 and making 4" ones too small. |
Bad install
The guy cut holes in the doors to fit dual 5.25 pioneers that are for midbass, then used crossovers to the front Dash speakers removing the originals and putting dual tweeters in each pod with a homemade bracket.
but the amplifier and most wiring was removed prior, so I’m having to do this all over myself. basically I bought factory speakers for the front Dash to remove those tweeters, I am going to replace the rears with 4 inch alpine two way, so I won’t need a crossover. The issue is the doors, he had custom fiberglass pods made and they’re falling apart. https://cimg6.ibsrv.net/gimg/www.6sp...43535ac42.jpeg |
All times are GMT -6. The time now is 11:25 PM. |
© 2024 MH Sub I, LLC dba Internet Brands