Hi all

Thinking of doing this to my 987.2. One quick question...I don't currently have an amp, do I need one? Somebody has posted yes but somewhere else has said no?

 

are you sure you don't have an amp?

 

Pretty sure. I have a "CDR-30" with no "Sound Package Plus" or "Bose" on the options list.

This is my list of option codes...it isn't very long...I am beginning to suspend that PASM was ticked by mistake", is really doesn't have much! But then, it was cheap!

022 Black instrument dials
061 Version for Great Britain
071 EU country version
099 Right-hand drive version
130 Control and indications in English
166 Internal production code
170 Interior noise suppression acoustic package RoW (Rest of World)
181 Standard climatic zones
195 Battery 70 Ah
199 Battery disconnection switch
211 Licence plate space Europe and RoW (Rest of World)
219 Regular differential (without limited slip)
240 Internal production code related to tyres
267 Automatically dimmable mirrors
268 Rain sensor
271 Door mirrors electrically adjustable and heatable, driver's side aspherical
369 2-way electrical standard seat, left
370 2-way electrical standard seat, right
399 17" Cayman 987.2 wheels
426 Without rear window wiper
441 Basic sound package
444 Wheel locks (approved by Thatcham Research)
446 Wheel caps with colored Porsche crest
466 Rear foglamp, right
475 PASM Porsche Active Suspension Management
476 PSM Porsche Stability Management
480 Manual gearbox, 6-speed
492 Headlamps for left-hand traffic
502 Produced at Valmet plant in Uusikaupunki, Finland
521 Tilt sensor
524 Immobilizer 433 MHz
534 Alarm 433 MHz
536 Alarm siren
555 Black seat belts
567 Top-tinted windscreen
571 Activated charcoal filter
572 Manual air conditioning
590 Steel doors
592 Standard fabric rooflining
621 12V socket in passenger side footwell
659 On-board computer
674 Preparation for Vehicle Tracking System
677 Driver card antenna
678 Alarm system connection
679 Restart inhibitor
695 CD-radio Porsche CDR 30
708 Internal production code
841 Basic steering wheel
870 Universal multimedia interface
946 Leather seats with leatherette rear side
P12 Option package incl. 267 268
X70 Stainless steel door entry guards with logo

 

With PCM3 you need an amp, bose or not but for sure

 

Thanks Serg, will have to think about that one.

And not deal with the company that said otherwise!

 

Hi guys, still struggling wit the telephone thing.

With the old mic the other side can hear me but very very silent.

I bought the mic for the PCM3 and it is still not working, now I hear nothing from the mic.

The old mic has 4 wires, the new one has only 2.
The old version was going to the PCM and to the amp.

As the new mic has only 2 wires, have I bought the wrong mic or where to connected the 2 wires?

Thanks
David

 

David,



Up there I wrote about two! new microphones. Look at the schematic carefully. Old mic is combo of two mics!

 

Sorry, I see. Question is which part numbers are needed.
I think I have the correct parts now. Is it correct to pin out the 2 cables from the new mics and place them into the old 4 wire connector?

Question regarding bluetooth:
- is this only to use the phone or also to play music and will it be a device of "source" when it is installed and coded correct?

Question regarding USB/ipod:
- I can't see this within the PCM menu to see if it is installed or not and put the codes in later at some stage. All the other parts i find directly within the PCM see that it is installed but not unlocked.

Question regarding AC:
It is flashing after turning the car key.
I changed to "internal" from external it is flashing but cooling. Is a vehicle handover necessary to solve this?

Rgeards
David


Thanks

 

With mics - yes...

No Bluetooth streaming in 3.0 unfortunately...

Usb menu in pcm will be visible when parts installed, code entered and usb device is connected.

 

Okay thanks, Mics I will check this week or so.

With the USB I am still struggling.
I can see all components and could go into the coding menu to enter the codes, but in this Dropdown where you should enter the codes device by device or function there is no USB written.

As you can see on the picture:
USB installed - yes
USB enabled - No
USB coded - No

Is this option somewhere else to find?

Thanks for helping

 

Usb it's UMS I think... because it's universal media interface in English

 

You are my hero! I will have a look.
THX

 

ums is the position.

I coded the gateway and now i can see the pcm3.

After that i put in the right time, and unlocked navi, maps, indiv. memory, sportchrono, ums.

But when i go to navigation it wont load the data - i stopped after 5min as it didnt loaded the map.

Do i need to go to the porsche rep that they update the unit?

The pcm 3 seems to be from the UK, as there were miles and mpg entered.

In piwis i have those errors:

 

5 min for dvd disk? Who told you that this is enough? By the way Europe map is 4 dvd...

 

i thought that the pcm3 has the navi maps on the ssd?

There is no dvd for map in the pcm3 - only one with musics from the previous owner..