|
Key Programming - new key works fully; original doesn't
Guys:
I have a 997.1 and bought an OEM 997.2 replacement to use as a spare key. My local Indy (that has PIWIS) programmed the new key for me and everything works great (recognized as Key 2, all functions work). However, my original key, which worked perfectly before, has lost its ability to remote unlock/lock the doors and trunk. The battery is good and the remote still lights up, but it doesn't actually unlock. Inside, the original key still starts the car and is recognized as Key 1 when starting the car. Shop tried several times to reprogram but nothing. They thought that the key electronics may have gone bad? Any ideas? |
Hard to say. I have 3 keys for my 997.1. I have the two original keys, plus a third that is the newer 997.2 style key. All three keys work perfectly.
|
Found this over on rennlist courtesy of user DHC
I had the same issue and also tried every iteration possible to get my keys to re-sync. The manual is not very helpful, but I finally stumbled on this approach, which worked great for me: Lock the doors from the outside by using the key in the door lock. Unlock the drivers side door using the key in the door lock. Within about 10 seconds or so, open the door and insert the key into the ignition. DON'T START THE CAR!! With the key still in the ignition, push the unlock button on the key. Voila, you should be good to go. |
Originally Posted by semicycler
(Post 4557767)
Found this over on rennlist courtesy of user DHC
I had the same issue and also tried every iteration possible to get my keys to re-sync. The manual is not very helpful, but I finally stumbled on this approach, which worked great for me: Lock the doors from the outside by using the key in the door lock. Unlock the drivers side door using the key in the door lock. Within about 10 seconds or so, open the door and insert the key into the ignition. DON'T START THE CAR!! With the key still in the ignition, push the unlock button on the key. Voila, you should be good to go. Printed and will try tonight! Thank you sir. :D |
Update -- it worked! Thanks again!
|
semi, another problem solved by you - excellent. I added to your Rep points !
|
didn't work
Originally Posted by semicycler
(Post 4557767)
Found this over on rennlist courtesy of user DHC
I had the same issue and also tried every iteration possible to get my keys to re-sync. The manual is not very helpful, but I finally stumbled on this approach, which worked great for me: Lock the doors from the outside by using the key in the door lock. Unlock the drivers side door using the key in the door lock. Within about 10 seconds or so, open the door and insert the key into the ignition. DON'T START THE CAR!! With the key still in the ignition, push the unlock button on the key. Voila, you should be good to go. this one didn't work for me. as key#2 was working fine, I've tried several times, but failed, one of my attempts the seat moved forward and nothing happened afterward. 2 months ago I had the lights control unit replaced and reprogrammed and not sure if that related/ caused the issue. should I put the key#1 away when try this ? the alarm starts peeping when just enter the key in the ignition : ( |
Amazing HELP!!!
Hi,
many thanks for the help below! The procedure works and is very easy. Changed the car battery but keys stop working... Now, everything is fine again. All the best!
Originally Posted by semicycler
(Post 4557767)
Found this over on rennlist courtesy of user DHC
I had the same issue and also tried every iteration possible to get my keys to re-sync. The manual is not very helpful, but I finally stumbled on this approach, which worked great for me: Lock the doors from the outside by using the key in the door lock. Unlock the drivers side door using the key in the door lock. Within about 10 seconds or so, open the door and insert the key into the ignition. DON'T START THE CAR!! With the key still in the ignition, push the unlock button on the key. Voila, you should be good to go. |
Originally Posted by semicycler
(Post 4557767)
Found this over on rennlist courtesy of user DHC
I had the same issue and also tried every iteration possible to get my keys to re-sync. The manual is not very helpful, but I finally stumbled on this approach, which worked great for me: Lock the doors from the outside by using the key in the door lock. Unlock the drivers side door using the key in the door lock. Within about 10 seconds or so, open the door and insert the key into the ignition. DON'T START THE CAR!! With the key still in the ignition, push the unlock button on the key. Voila, you should be good to go. Worked like a charm!! Thank you!! |
| All times are GMT -6. The time now is 09:27 AM. |
© 2026 MH Sub I, LLC dba Internet Brands