6SpeedOnline - Porsche Forum and Luxury Car Resource

6SpeedOnline - Porsche Forum and Luxury Car Resource (https://www.6speedonline.com/forums/)
-   Aston Martin Vendor Classifieds (https://www.6speedonline.com/forums/aston-martin-vendor-classifieds-159/)
-   -   Forgestar F14 Super Deep, Full Face, and Concave! Many Fitments! Rotary Forged! (https://www.6speedonline.com/forums/aston-martin-vendor-classifieds/306051-forgestar-f14-super-deep-full-face-concave-many-fitments-rotary-forged.html)

Get Your Wheels 04-22-2013 03:59 PM

Forgestar F14 Super Deep, Full Face, and Concave! Many Fitments! Rotary Forged!
 
A modular, full-faced and deep concave wheel that is strong, lightweight and reasonably priced! Fitments for Aston Martin (including the Aston Martin V8 Vantage and other Aston Martins)!

Lots of space for BBK clearance and custom finishes are also available.

Forgestar customizes each wheel and offset based on your order, so you can get the exact fitment you want.

Semi Concave - Almost flat, but it has a subtle concavity to the face. These look great and work great for a classy & OE look and feel.
Deep Concave - Much more aggressive concavity to the face, and very noticeable. Available in 9.5" - 12" wide only.
Super Deep Concave (19" wheel only - extra charge) - Newest concavity. More aggressive concavity than "Deep Concave". *Available in 19"x 9.5 - 12" wide only.

18" Fitments
18" Semi Concave
188.5 offsets from +26 to +50
189.0 offsets from +20 to +55
189.5 offsets from +26 to +60
18" Deep Concave
1810 offsets from +16 to +42
1811 offsets from +23 to +55
1812 offsets from +36 to +68

19" Fitments
19" Semi Concave
19x8.5 offsets from +26 to +48
19x9.0 offsets from +20 to +55
19" Deep Concave
19x9.5 offsets from +4 to +42
19x10 offsets from +20 to +44
19x11 offsets from +23 to +55
19x12 offsets from +36 to +68
19" Super Deep Concave
19x9.5 offsets from -25 to +24
19x10 offsets from -19 to +32
19x11 offsets from -6 to +42
19x12 offsets from +6 to +55

20" Fitments
20" Semi Concave
208.5 offsets from +26 to +50
209.0 offsets from +18 to +56
2010 offsets from +31 to +69
2011 offsets from +48 to +81
20" Deep Concave
209.5 offsets from +7 to +43
2010.5 offsets from +20 to +55
2012 offsets from +39 to +75

Custom Mag Blue Finish Super Deep
http://i.imgur.com/Wv2lgD7.jpg?1

Staggered Silver Semi Concave & Super Deep
http://i.imgur.com/A89lb34.jpg?1

Custom Gold Finish on a Square Deep Concave Set
http://i.imgur.com/D8xfZ83.jpg?1

Matte Black Super Deep
http://i.imgur.com/ORIJQml.jpg?1

Deep and Super Deep Staggered
http://i.imgur.com/cTpeaqn.jpg?1

L.A.P. 06-02-2013 10:56 PM

Have been seeing a lot of people with Forgestars. Just wondering what construction process is used in their creation. I assume they are cast? Look nice!

Get Your Wheels 06-03-2013 10:42 AM


Originally Posted by L.A.P. (Post 3863124)
Have been seeing a lot of people with Forgestars. Just wondering what construction process is used in their creation. I assume they are cast? Look nice!

Since Forgestar's website is a lot more inclined to answer this question, here is what the technology entails:

"Forgestar's Rotary Forged Flowforming process is a unique solution to a common problem how to make a wheel both light and strong.
This specialized process begins with a low pressure type of casting and uses a special machine that spins the initial casting, heats the outer portion of the casting and then uses steel rollers pressed against the rim area to pull the rim to its final width and shape. The combination of the heat, pressure and spinning create a rim area with the strength similar to a forged wheel. During Flow Forming, the pressure applied to the cast rim actually changes its mechanical properties, so its strength and impact values become similar to those of a forged rim. That translates to up to 15% less weight when compared to a standard cast wheel. The resulting grain structure within the alloy of the wheel is linear, flowing in a single direction.
This grain structure pattern, combined with the exceptional quality of casting required for the process, gives the rim area of the wheel huge mechanical strength, and elongation. As a result of these mechanical characteristics, Forgestar is able to reduce the thickness of the rim area resulting in reduced weight, without compromising strength and resistance to impact."


Essentially, what you get is a wheel in between a traditional cast and a fully forged custom wheel. Flowforming is a lighter and stronger wheel than traditional cast wheels. In addition, you are able to get custom offsets which is a huge, huge plus those wanting an exact with without having to work around using spacers. And they are very, very reasonably priced!

L.A.P. 06-03-2013 05:26 PM

Makes sense a great option for people with a tighter budget.. Might have to consider a set in the future

Get Your Wheels 06-04-2013 03:00 PM

1 Attachment(s)

Originally Posted by L.A.P. (Post 3863652)
Makes sense a great option for people with a tighter budget.. Might have to consider a set in the future

Definitely! However, if you are looking for a fully custom/forged wheel, we can help setup a set for you as well. We just finished an ADV.1 wheel which is on the completely opposite in terms of pricing in comparison to Forgestar's.

https://www.6speedonline.com/forums/...ine=1370379618

Get Your Wheels 06-05-2013 09:09 AM

All PM's replied, thank you!

Get Your Wheels 06-10-2013 11:06 AM

Monday bump!

Get Your Wheels 06-13-2013 01:54 PM

All PM's replied, thank you!

Get Your Wheels 06-26-2013 01:58 PM

Super Deep bump!

Get Your Wheels 08-07-2013 12:02 PM

Thank you for the continued interest!

Get Your Wheels 08-13-2013 03:40 PM

All PM's replied, thank you!

Get Your Wheels 08-21-2013 01:22 PM

Thank you for your continued interest!

Get Your Wheels 08-26-2013 02:27 PM

All PM's replied, thank you for your continued interest!

Get Your Wheels 08-29-2013 11:58 AM

PM us for our special Labor Day pricing! Good until Monday!

Jibberingloon 09-04-2013 11:43 AM

Have you got any pictures on a vantage?????

Please post some ;)


All times are GMT -6. The time now is 05:31 AM.


© 2019 MH Sub I, LLC dba Internet Brands