Opinions please
I'm going to space out my vantage std 19 inch wheels 11mm front and 23mm rear, will be getting this done next week, I want to repaint the standard silver wheels in black my car is meteorite silver (dolphin grey) i was thinking high gloss black but am unsure if I should do it satin black. I want to bad boy my vantage a bit as I think it's a bit naf, having enjoyed it for years in it's standard form and covered some 30000km can you guys who are on top top of your styling please give me your comments?feel free to rubbish my idea if you feel so, I won't take it to heart I'm trying to do this once because of costs. whatever I do will be reversible and the spacers we are making will simply slip off as well. all comments welcome |
Originally Posted by captain Greg
(Post 4765489)
I'm going to space out my vantage std 19 inch wheels 11mm front and 23mm rear, will be getting this done next week, I want to repaint the standard silver wheels in black my car is meteorite silver (dolphin grey) i was thinking high gloss black but am unsure if I should do it satin black. I want to bad boy my vantage a bit as I think it's a bit naf, having enjoyed it for years in it's standard form and covered some 30000km can you guys who are on top top of your styling please give me your comments?feel free to rubbish my idea if you feel so, I won't take it to heart I'm trying to do this once because of costs. whatever I do will be reversible and the spacers we are making will simply slip off as well. all comments welcome 2. I would likely do S TEK Satin, or Matte Paint Protection Film on your roof (the square part) and buy or have vinyled your chrome trim window surrounds. 3. Lower it on VAP springs 4. Then smoke out your lights to get the darker look, not blacken them though. I am sure there are several ideas people will throw at you, but the above with a louder exhaust and tune also would transform your car, to where its so different you will think its a new car. Just my opinion |
Perfect candidate for black chrome. I suggest you do some image searches, etc. Personally, I’d keep the stock wheels and buy a set on eBay to modify, and have them shipped to a reputable facility for the process, I was able to negotiate with a seller on eBay for $500 for his perfect set that matched my current set. The ability to turn it back to stock was worth it in my personal scenario. Something to consider, anyway. Nevertheless, I would strongly consider a black chrome route with your current exterior color. Imho, it would look stunning. |
I have the same color car as yours, mine is a 2009... I too wanted to change a few things as I don't find the chrome/polished bits look as nice on a Meteorite Silver as they do on Black so I decided last year to get all that stuff blacked out, the side strakes/grills, front grill, exhaust tips, hood grills all got powder coated satin black. the window surround got wrapped gloss black, and now I am having my HRE P101 painted satin black as I wasn't 100% sure and didn't want to do powder coating right away on them. Over the past 3 yrs of owning this beast I also added a front carbon lip, rear carbon diffuser, carbon fiber mirror caps and V12 side sills for the looks and VelocityAP 200 Cells Cats and a their awesome tuning. My car is in storage until sometime in April 2019 but as soon as it is out and the wheels are mounted I will share pictures.
https://cimg4.ibsrv.net/gimg/www.6sp...83eb0f474d.jpg https://cimg6.ibsrv.net/gimg/www.6sp...6a55e2cd2d.jpg https://cimg9.ibsrv.net/gimg/www.6sp...bc4791501d.jpg https://cimg2.ibsrv.net/gimg/www.6sp...2a58f74f7d.jpg https://cimg4.ibsrv.net/gimg/www.6sp...47d533665a.jpg https://cimg6.ibsrv.net/gimg/www.6sp...5b2244b8d5.jpg |
Here are some shots of mine blacked out...i like the red tail lights.... blacked out roof, CF mirror covers, 20" wide satin black rims... dark tint windows also. .meteorite silver...
kept the stainless exhaust tips... like the glimmer of stainless. Good luckhttps://cimg4.ibsrv.net/gimg/www.6sp...f6d041bcd4.jpg https://cimg7.ibsrv.net/gimg/www.6sp...2caf591714.jpg https://cimg1.ibsrv.net/gimg/www.6sp...f9e1d49e68.jpg |
This car looks great! its not an option to purchase wheels at this stage the USD price is not the issue it's the cost to get them here then add 15% adverlorim duties then add another 10% for some custom duty then add 15% vat onto the entire load puts a set in at nearly 100000.00 yes 100K for a car that is only worth say 800K is not wise considering its age. in SA we get ripped off with duties remember we have a recorded 68 million people with less than 4 million Tax payers so the Government needs every angle to get cash, we can't get around it. add that white people ( I'm not saying I'm white,are not allowed to work) it's discouraged to employ white males so we have a hard time here guys so I will do what I can with limited resources, I will do the black accents as described and shown I really like it. thanks guys any more pics will be appreciated |
https://cimg6.ibsrv.net/gimg/www.6sp...55b81c8eb0.jpg
Similar upgrades as the other cars featured with the addition of red accents. |
The car really looks nice. I didn't know that 200 cell cats were available for the 4.7L.
Dennis |
Just picked up my HRE P101 in Satin Black.... :-)
https://cimg0.ibsrv.net/gimg/www.6sp...ca75d145fe.jpg |
Originally Posted by handyman2009
(Post 4765620)
Just picked up my HRE P101 in Satin Black.... :-)
https://cimg0.ibsrv.net/gimg/www.6sp...ca75d145fe.jpg Party time :) |
@captain Greg Not many people are aware of fashion PPF film that are now available. You could do your roof in clear PPF carbon fiber which would make it look like it is original CF done in your body color. Same for the mirrors. I will be posting a thread sometime this month explaining it and showing results. We will see but there are options. PPF is now available in Matte black, gloss black, CF clear, and black and regular clear. All protect like a PPF should. Not like the vinyl thin films.
|
Is this something that I could put over a couple of errors on my front splitter (V8V S)?
|
|
Originally Posted by MRCW
(Post 4765500)
Here are some shots of mine blacked out...i like the red tail lights.... blacked out roof, CF mirror covers, 20" wide satin black rims... dark tint windows also. .meteorite silver...
kept the stainless exhaust tips... like the glimmer of stainless. Good luckhttps://cimg4.ibsrv.net/gimg/www.6sp...f6d041bcd4.jpg https://cimg7.ibsrv.net/gimg/www.6sp...2caf591714.jpg https://cimg1.ibsrv.net/gimg/www.6sp...f9e1d49e68.jpg |
What are you guys using to black out the chrome window trim?
|
Gloss Black wrap for me
|
Originally Posted by handyman2009
(Post 4765837)
Gloss Black wrap for me
|
https://cimg5.ibsrv.net/gimg/www.6sp...497716b316.jpg
https://cimg4.ibsrv.net/gimg/www.6sp...11eada4090.jpg
Originally Posted by Junior94
(Post 4765820)
looks great ! What are your rims specs ? Along with the offsets? |
mine was done about 2yrs ago and they only removed the little window trims under the mirror and the one in front of the mirror as those trims are only two way taped to the car. Everything still looks great after 2 yrs, good luck
|
Originally Posted by MRCW
(Post 4765847)
https://cimg5.ibsrv.net/gimg/www.6sp...497716b316.jpg
https://cimg4.ibsrv.net/gimg/www.6sp...11eada4090.jpg 9" and 10"... not sure of the offsets but there are some calculators oon line to determine... They are about 1/2" out from top of wheel well |
Originally Posted by Denny 6.53
(Post 4765781)
Is this something that I could put over a couple of errors on my front splitter (V8V S)?
Sir, I just corrected about 10 error on my front splitter. I couldn't get two of the marks out (they look like CF again, but there is a potmark in the clear part. But you can't tell. Then I covered it with regular PPF. NO, you cannot cover it with this film. IT would look horrible. You can cover yours in basic clear film, but that would still show the rock chips. If you car is up for the winter, PM me, and maybe we can figure something out on yours to get it fixed first. Second, you can cover yours with a color film and cover it all up if you desire. The above CF clear film makes it look like your car panel is done in colored (your body color) carbon fiber. I will show some examples in a week or so. I am going to do my black roof in it. |
Ok quick update, I have had the window trim and the rear defuser (silver) all done in satin black. 3M 10 year film the guy did it for me a bit of a favour on Sunday this cost came in at R1600.00 +- USD 120 i machined the wheel spacers myself I exhausted my options with suppliers who were unsure on the questions I asked and how many nuts and studs and and and. being in SA help on these cars is not easy although Aston 40 on here who live 1500km away has been a great inspiration. I machined the spacers from T6062 aircraft alluminium, I have kept the standard 41mm studs stock in case I want to go back to standard the rear spacer is 23mm and I have today had another mate with a bigger mill remove 3,4mm deeper into the bolt dish on the wheel itself, the rear spacer has a 12 mm deep spigot and now the wheel fits on and the new nuts will each have 7 turns this in engineering terms will be as good as OEM. keeping the standard stud with no cutting. the front I could not get happy with the suggested 11 mm spacer so made 10.22mm this gives sufficient spigot contact in the standard rim bolts ok here is a thorn 14x2 @$&@&)! FsKe no one in Africa carries this .....so I have received from JHB a set of wheel nuts from eibagh with a 10x1.25 thread I have machined it to a 12mm blank and am now cutting a 14x2 thread this is a time consuming job wheels go in for paint tomorrow and all being good I will have the project completed by Thursday I will try to post pics |
https://cimg2.ibsrv.net/gimg/www.6sp...6b70062c84.jpg
https://cimg9.ibsrv.net/gimg/www.6sp...a8b56c924b.jpg I will try and load my pics. |
|
Looks great
|
Greg it looks great!! Can I now come an race the thing? Lets see if the paint stay on the rims!!
Well done. Regards |
All times are GMT -6. The time now is 02:03 AM. |
© 2024 MH Sub I, LLC dba Internet Brands