Will they fit ?? Niche Essen (Need opinions)
Hi am I looking at purchasing Niche Essen for my 2007 Vantage. Will 20x 9 with a +35 or +40 offset front and 20x10 with a +35 or +40 work? I don’t understand the whole offset concept. Those are the two given options for me to pick when I plug in my year. Also any tire recommendations for those sizes? Thanks ! https://cimg8.ibsrv.net/gimg/www.6sp...0bd74cbe1.jpeg |
40 is good for the front, but not enough at the rear, IMO. You'd be better off with 50 mm in the rear, this would move the face about 20 mm outwards as compared to stock. |
It only gives me the two options would you suggest still order a +40 and maybe put some spacers on the rear to flush it with the fenders?
|
I run 20x9 +35 in the front and 20x11 +45 in the rear and is maximum flush without any scraping.
https://cimg1.ibsrv.net/gimg/www.6sp...77976f6c6a.jpg 20x9 +35 and 20x11 +45 HRE wheels Given my dimensions, your posted setup will fit with 295 tires in the rear. https://cimg2.ibsrv.net/gimg/www.6sp...cc9a579e8d.png |
Originally Posted by Zettinger
(Post 4765768)
I run 20x9 +35 in the front and 20x11 +45 in the rear and is maximum flush without any scraping.
https://cimg1.ibsrv.net/gimg/www.6sp...77976f6c6a.jpg 20x9 +35 and 20x11 +45 HRE wheels Given my dimensions, your posted setup will fit with 295 tires in the rear. https://cimg2.ibsrv.net/gimg/www.6sp...cc9a579e8d.png |
Originally Posted by Junior94
(Post 4765771)
Appreciate you looking into this for me. So if I do decide to order you suggest to do a 20x9 with a +35 upfront instead of doing a +40? That’s a very nice set up you got there. Now for the rears it only gives me a 40 offset unlike the 45 you have. Basing it off the picture you sent me the +40 offset will work once it’s a 295? The car will also be slightly lowered. https://www.willtheyfit.com/ Just keep in mind that my setup is maximum fit without impact on dynamics. I still can corner hard without scraping. |
Originally Posted by Zettinger
(Post 4765772)
you can play around here.
https://www.willtheyfit.com/ Just keep in mind that my setup is maximum fit without impact on dynamics. I still can corner hard without scraping. I was trying that, but still wasn’t making sense to me.. do you think it’s possible if I went with a +40 offset on both front and rear ? Also if I do decide to get them what front tire size would you recommend? |
Originally Posted by Junior94
(Post 4765773)
I was trying that, but still wasn’t making sense to me.. do you think it’s possible if I went with a +40 offset on both front and rear ? Also if I do decide to get them what front tire size would you recommend? It depends how agressive your want your wheel setup. My tires are Michelin PS4S XL 245/35 and 295/30R20. I would absolutely recommend going with Michelin PS4s since they improved the driving experience a lot, even the comfort became better with going from 19 to 20". keep in mind, the lower the offset number, the further the wheel will be on the outside. https://cimg4.ibsrv.net/gimg/www.6sp...e6c42daa3d.jpg https://cimg7.ibsrv.net/gimg/www.6sp...7efb3efe90.jpg |
Originally Posted by Zettinger
(Post 4765782)
I can't make the decision for you.
It depends how agressive your want your wheel setup. My tires are Michelin PS4S XL 245/35 and 295/30R20. I would absolutely recommend going with Michelin PS4s since they improved the driving experience a lot, even the comfort became better with going from 19 to 20". keep in mind, the lower the offset number, the further the wheel will be on the outside. https://cimg4.ibsrv.net/gimg/www.6sp...e6c42daa3d.jpg https://cimg7.ibsrv.net/gimg/www.6sp...7efb3efe90.jpg |
Originally Posted by Junior94
(Post 4765764)
It only gives me the two options would you suggest still order a +40 and maybe put some spacers on the rear to flush it with the fenders?
Why dont you contact BC Forged and talk with them about what fitment you may want and see if any of thier wheels would work for you. Having an expert who sizes wheels to a vehicle is paramount if you dont know or understand what is going on. Just clicking boxes on a website and having wheels shipped is not the best route to go unless you know what your are doing. I also am not totally up on what wheels are the best, but to me Niche and others like it are like DUBs. Kinda ghetto. Just my opinion. Forgestar, BC Forged, HRE are some of the best. There are also PLENTY of threads on here discussing wheel sizes, offsets etc........ Not hard to find and learn |
Originally Posted by SheriffDep
(Post 4765844)
Why dont you contact BC Forged and talk with them about what fitment you may want and see if any of thier wheels would work for you. Having an expert who sizes wheels to a vehicle is paramount if you dont know or understand what is going on. Just clicking boxes on a website and having wheels shipped is not the best route to go unless you know what your are doing.
I also am not totally up on what wheels are the best, but to me Niche and others like it are like DUBs. Kinda ghetto. Just my opinion. Forgestar, BC Forged, HRE are some of the best. There are also PLENTY of threads on here discussing wheel sizes, offsets etc........ Not hard to find and learn |
Originally Posted by Junior94
(Post 4765858)
Fair enough, I guess there is no massive hurry. I will take my time and find the right wheels. I do agree to get someone to help you out. They are experts. Good luck |
Originally Posted by MRCW
(Post 4765946)
I wouldn't worry about wheel snobs... get what you want/afford... After all the older vantages are a bargain and not so 'expensive' you have to spend $800 to $2,500 per wheel to get a nice ride. Better to spend your dollars on really good tires... that is what connects you to the road
I do agree to get someone to help you out. They are experts. Good luck |
Here's my 2013 with the Essen wheels. 20 x 9 +35 in front and 20x10 +40 on the rear. I really like it. The tire tread is flush with the arches, but, the wheel itself is about 5mm outside the arch.
https://cimg7.ibsrv.net/gimg/www.6sp...c587b7c4b0.jpg |
Originally Posted by englishmatt
(Post 4765973)
Here's my 2013 with the Essen wheels. 20 x 9 +35 in front and 20x10 +40 on the rear. I really like it. The tire tread is flush with the arches, but, the wheel itself is about 5mm outside the arch.
https://cimg7.ibsrv.net/gimg/www.6sp...c587b7c4b0.jpg |
All times are GMT -6. The time now is 03:13 PM. |
© 2024 MH Sub I, LLC dba Internet Brands