When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
I was installing an Apple Carplay-Android Auto box in my 2017 DB11 (LHD). When I re attached the battery, I heard a pop and the lower parts of the center stack do not operate or light up. The problem may be in a 16 fuse panel that appears to be near the driver inside the car (panel B I the attachment). I'm trying to figure out exactly where it is before I start tearing things apart. Anyone have any suggestions?
I was installing an Apple Carplay-Android Auto box in my 2017 DB11 (LHD). When I re attached the battery, I heard a pop and the lower parts of the center stack do not operate or light up. The problem may be in a 16 fuse panel that appears to be near the driver inside the car (panel B I the attachment). I'm trying to figure out exactly where it is before I start tearing things apart. Anyone have any suggestions?
For anyone who may need to deal with this in the future. Fuse panel B is locatedlunder the panel just inside the door. The one with the black rubber grommet to seal where air moves from the dash to the door.
For anyone who may need to deal with this in the future. Fuse panel B is locatedlunder the panel just inside the door. The one with the black rubber grommet to seal where air moves from the dash to the door.
Thanks! I know this thread was awhile back but I am looking to check those fuses now. I have the single day subscription to the Aston service manuals but even with that diagram it wasn’t clear where that fuse box was.
I have the info on removing that panel from the manual but was there anything you can mention about removing it, was it straight forward? Any gotchas?
That’s a scary panel to remove, but I suspect I have a blown fuse and all the others are good.
