FS:2003 Miata Club Sport - TT/CSP/HPDE Well Prepped
#1
"Sold" FS:2003 Miata Club Sport - TT/CSP/HPDE Well Prepped
Year: 2003
Make: Mazda
Model: MX-5 Miata
Price: $12000
Mileage: 39000
Color: White
Private or Dealer Listing: Private Listing
Location (State): PA
Transmission: Manual
Drivetrain: Rear Wheel Drive
This is one of 25 ever made 2003 Club Sports , soft top delete.
Please read full description below .
2003 Miata Club Sport
38,5xx miles
2nd Owners
White w/black interior
Located in North East PA
Motor:
1.8L VVT factory long block
MS Labs MS3 ECU ( All work & tuning performed by Peter Florance PF-Tuning Virginia Beach , Virginia
145whp / 127 torque ( Dyno sheets available)
Racing Beat 4-1 Header ( Swaintech coated ) Magnecore KV85 8.5mm Plug wires
Squaretop Intake manifold ( port-matched to Skunk 2 TB ) ( performed by Joe Brennan -JoeFis racing )
Miata Roadster intake manifold insulator kit (JoeFis Racing)
Skunk 2 Throttle body, Moroso Catch Can, Custom cold air intake - ( JoeFis racing & PF Tuning )
KOYO Aluminum radiator (36mm)
Garage Star radiator cooling plate, latch cut-out, Samco Silicone Hoses Flyin’ Miata ( M-Tuned ) coolant Re-Route , Front radiator opening Ducted to radiator ( JPC Fabrication)
Flyin’ Miata Stage I clutch ( JoeFis Racing , May 2016) Lightened Flywheel 10.5lbs
Flying’ Miata Clutch-Delete switch .
Injectors balanced and blue-printed by Marren (CT) June 2017
New AGM Duralast battery June 2017
Custom exhaust-Coast Fabrication ( Burns ) 22 x4.5x 2.5 muffler “Bristol Core-Spec 31packing ” ( exits rear-near center ) Built by JPC Fabrication.
Also have custom rear muffler section to meet sound requirements at certain venues (Lime Rock, Laguna Seca)
Suspension:
949 Racing Adjustable End Links , Front & Rear
Racing Beat 1.125 Front Sway Bar
Stock Rear Sway Bar
FCM Fat Cat Motorsports FCM Elite coil-overs 600/400
Spring upgrade 2017 - Hyperco 600/400 w/ Swift helpers ( SJF Performance )
Wilwood brake proportioning valve
Corner Balance & Alignment ( 2017 ) performed by SJF Performance
Energy Suspension bushings
OEM CS suspension sold years ago
Interior:
Goodwin / AWR seat rails Sparco Sliders ( Drivers seat & passenger ) Recaro SPG ( drivers seat ) . Sparco Sprint V ( passenger seat )
Schroth Profi II Hans 6PT harnesses “Date 2021” both Driver & Passenger.. Hard Dog Double Diagonal Roll Bar and harness bar
Sparco R375, 350 mm steering wheel ( removable ) NRG quick dis-connect hub
AutoMeter “Sport Comp” Oil pressure & Water Temp Gauges ( mounted center air vents )
AEM Air/Fuel gauge ( AFR ) mounted in radio delete plate .... Ecliptech Shift-I Shift light (center-mounted on steering column) Radio Delete plate (Factory radio delete)
Stock NA drivers seat on slider included
Oddly, the original owner actually added BACK IN a soft top w/ glass rear window - it was the wife’s weekend car.
EDIT - Original Hardtop included, sorry if that wasn't clear.
Wheels & Tires :
Note: All wheels are in nice condition .
Enkei PF01’s 15x8 ( Continental ECS 205/50/15) New April 2017
Enkei RPF1’s 15x8 ( Nitto NT01 205/50/15 ) still have good tread .
949 Racing 15x9 ( Gen 3 ) black ( BF Goodrich Rival 1.5 -225/45/15) New June 2017
Also comes with original airbag, steering wheel and intake manifold, center console and original trunk lid with small spoiler, original ECU and radiator.
New here but PCA members for many years.
PM with any questions.
Last edited by mizzpandme; 09-11-2017 at 04:52 AM. Reason: format