Cone or Tire Marks on Your Clear Bra? Premier's New Solution
 

We at Premier Protective Films are proud to add a new product to our PF1 line up - PF1 TTR. Over the years, we were constantly asked what can be used to remove cone marks as well as other debris transfer onto the clear bra. We have finally completed testing of our new proudct 2 months ago and now bringing it to the market.

PF1 TTR is an advanced agent that is created for the surface of your clear bra. It attacks the marks and transfers at the micro-level to loosen up these particles so that it may be safely wiped off with a clean microfiber towel. Most importantly, PF1 TTR can be utilized on paint protection film with a clearcoat or topcoat safely.

Simply clean the area in which PF1 TTR will be applied. Next spray on and allow for TTR to start working right away. In five seconds, begin wiping with a clean microfiber towel. Repeat these steps as needed.

Here we have a vehicle that had a run in with a concrete pole in a parking lot. There were deep abrasions in the clear bra, that fortunately if not for the clear bra, the bumper would have needed a repaint. This incident occured 9 months ago and at that time we could not find a way to remove the black marks as they seemed to have permanently burned itself to the clear bra.

Upon completion of our product, we did not hesitate to bring his vehicle in for our ultimate PF1 TTR test. In 10 minutes time, the black marks were removed. The scratches / abrasions remained, but the heavy visible black transfer was taken off.

**Cost for the PF1 TTR in our 16oz bottle is $20 + shipping. For orders, please contact our sales staff by phone at 510-623-1308.

**Wholesale inquiries welcome, please contact David - david@premiermobilegroup.com . Please have resale / business license prepared

I had the pleasure of seeing this product in action yesterday on a Murci that we had premier wrap. Kris did a great job of removing some etching in the bra using this product. Thumbs up fellas...keep up the good work.

Thank you Moe. We had the distinct pleasure of bringing the F430 together alongside with Glistening Perfection. Pictures of the F430 will be posted up.

On another note, our PF1 TTR is working well very well with getting stubborn to remove stains. We will be posting results by comparing it to products like Goof-off to depict how well our product works with the film.

Due to high demand of our new launch of the PF1 TTR, we are now backordered. For all orders placed post September 24th, your shipments will be shipped out on September 29th. Thank you all for your patience.

fellow 6speeder's review of our PF1 TTR: https://www.6speedonline.com/forums/...rks-great.html

Does it help with bugs or bird-poo stains on Venture Shield?

I love this stuff. I actually got my hands on this a few months ago from Premier. They wanted me to try it out since I do track my Pcars. Their T.T.R. works very well in getting some of tire chunk scrapes I get at the track off. Before, I clayed and even used WD40 on the bra and it would then start working. Now, I wouldn't have to spend more than a minute taking off stubborn things from the bra. Great job for Premier for coming up with a solution to this.

This would depend if there's any etching into the film.

Our local detailer, Autoconcierge's take on our TTR - http://www.luxury4play.com/detailing...olution-2.html

Can I get this online?

Could contact us directly by phone or you could contact one of our vendors - http://www.pyspeed.com/category-s/570.htm

cool product... cone marks after an autox are super hard to remove... will give it a try!

I"m gonna try this. As a trackjunkie with 90% of my RS covered in clearbra, I've been looking for the holly grail for years. I've tried them all, including but not limited to WD40, Simple green, 3M Adhesive remover, SIP on Flex, Miracle Wash from Amsoil, Racer Eraser etc etc. The last 2 are the best ones I've tried and used, but my bra is still covered in rubber marks.

Let us know how it works out