Stuart's Paint and Body Techart MASTERPIECE!
Thread Starter
|
Former Vendor
Joined: May 2009
Posts: 700
From: DFW
Rep Power: 0
Stuart's Paint and Body Techart MASTERPIECE!
Hey Hey!
Once again, we were put up to the challenge, this 997 TT transformed into a masterpiece.
As you will see, we spent many hours making sure everything was flawless!
We did everything from custom mounted screens to custom LED foglights.
Work overview:
Front end: Custom mesh grills made, they actually install on the radiators.
LED’s: Techart upgrade daytime running lights, LED fog lights, custom fit duck work up and front re-trimmed and fit.
Bumpers: bumper shocks aren't tampered with, the very edges of the bumper rebar had to be cut off.
Of course our signature GT2 grills, Techart rockers and a new decklid and wing
Rear bumper: Aftermarket EVOM intercoolers, had to re-cut and re-fit the Intercoolers and all the duct work had to be re-shaped and molded. All brackets had to re-cut and re-done. The lower rear diffuser had to be modified for aftermarket exhaust.
Once again, we were put up to the challenge, this 997 TT transformed into a masterpiece.
As you will see, we spent many hours making sure everything was flawless!
We did everything from custom mounted screens to custom LED foglights.
Work overview:
Front end: Custom mesh grills made, they actually install on the radiators.
LED’s: Techart upgrade daytime running lights, LED fog lights, custom fit duck work up and front re-trimmed and fit.
Bumpers: bumper shocks aren't tampered with, the very edges of the bumper rebar had to be cut off.
Of course our signature GT2 grills, Techart rockers and a new decklid and wing
Rear bumper: Aftermarket EVOM intercoolers, had to re-cut and re-fit the Intercoolers and all the duct work had to be re-shaped and molded. All brackets had to re-cut and re-done. The lower rear diffuser had to be modified for aftermarket exhaust.
Last edited by StuartsPNB; Jan 5, 2010 at 11:19 AM.
Banned
Joined: Apr 2009
Posts: 591
From: Fort Lauderdale
Rep Power: 151
Trending Topics
Registered User
Joined: Aug 2009
Posts: 650
From: Philadelphia, PA
Rep Power: 107
Car looks absolutely beautiful.
Question - from the pics, it looks like the shop is somewhat dusty; is that a non-issue, even with the fresh paint? Given the results (which are phenomenal), I'd guess it doesn't matter? Or I'm missing something obvious, which is certainly possible.
Question - from the pics, it looks like the shop is somewhat dusty; is that a non-issue, even with the fresh paint? Given the results (which are phenomenal), I'd guess it doesn't matter? Or I'm missing something obvious, which is certainly possible.
Registered User
Joined: Jul 2004
Posts: 2,116
From: Los Angeles
Rep Power: 143
The turn signal/running lights are available from Techart. The fogs are custom.
Thread Starter
|
Former Vendor
Joined: May 2009
Posts: 700
From: DFW
Rep Power: 0
THANKS FOR THE COMMENTS EVERYONE! It's great to see multiple 6speed sponsors involved in 1 project.
Thanks Techart, EVOM's and Peter@Wheelexperts
Our paint section of the shop is completely sealed away from our prep areas. If we were to detail the shop everyday, the amount of dust created from sanding alone would still win.
Each to there own! We have upgraded many 997's to the 2010 lights.
Let me know if you want it done! We can do it...
Merry Christmas,
-Nathan
Thanks Techart, EVOM's and Peter@Wheelexperts
Car looks absolutely beautiful.
Question - from the pics, it looks like the shop is somewhat dusty; is that a non-issue, even with the fresh paint? Given the results (which are phenomenal), I'd guess it doesn't matter? Or I'm missing something obvious, which is certainly possible.
Question - from the pics, it looks like the shop is somewhat dusty; is that a non-issue, even with the fresh paint? Given the results (which are phenomenal), I'd guess it doesn't matter? Or I'm missing something obvious, which is certainly possible.
Our paint section of the shop is completely sealed away from our prep areas. If we were to detail the shop everyday, the amount of dust created from sanding alone would still win.
Let me know if you want it done! We can do it...
Merry Christmas,
-Nathan