Alekshop's Brand New Chalk Porsche 991.2 GT3 BBi Roll Bar Safety Package Install
 

Attachment 1

Alekshop's Brand New Chalk Porsche 991.2 GT3 BBi Roll Bar Safety Package Install

Attachment 537194

Brand New Chalk 2018 991.2 GT3 Track Ready with our BBi Autosport Roll Bar & Schroth Racing Safety Package. To provide proper restraint & improved protection, Alekshop installed our BBi Autosport StreetCup Roll Bar Safety Package custom painted in Chalk to match the exterior and a set of Schroth Racing GT3 specific harnesses with our BBi Sub-Belt Brackets. Located in Fremont, California, we are proud to have Alekshop as one of our latest authorized installation centers in the country representing our complete line of performance and safety upgrades. Here are some pictures of that we would like to share below.

Upgrades

Safety Package

• BBi Autosport StreetCup Roll Bar Custom Painted in Chalk
• BBi Autosport Sub Belt Bar
• Schroth Racing Profi II GT3 HANS Harnesses

Bar Installed

Attachment 537195
Attachment 537196

Completed Project

Attachment 537197

BBi Porsche 991 GT3/ GT3RS / Cayman GT4 Sub-Strap Mount

https://c1.staticflickr.com/9/8815/2...1b4c5c0d_h.jpg
https://c1.staticflickr.com/9/8374/2...02e53555_h.jpg

If you have the optional Sport Bucket seats and planning to install 6-point race harnesses, then you will need this bracket. This bracket bolts directly to the seat and keeps the harnesses at the proper 10-20° angle regardless of the seat position.

Schroth Racing Profi-II HANS Harness, Porsche GT3 Specific

https://c1.staticflickr.com/9/8032/2...a3aee909_h.jpg

Porsche GT3 Cup Cars come with Schroth belts direct from the factory. They are specific because of the lap belt attachment. They have a sewn-in bracket that fits perfectly on the factory mount. Standard belts require additional fabrication and a spacer to make them work. These are a bolt-in replacement which is much easier. The sub-straps have no adjusters to fit correctly in the vehicle, and the shoulder belts are shorter to reach the works cages with minimal excess.

Features

• Shoulder: HANS Specific 2" tapered to 3" Shoulders
• Lap: Sewn-in B43A (GT3 Specific Hardware)
• Sub belts: LV11 with B14 Snap-in Bracket Wrapped-in
• Include hardware: 1 SG23 7/16" Eyebolt, 1 S3 Wavy Washer
• Available with Pull-Down lap belts only

BBi Autosport Porsche 991 GT3 StreetCup II Bolt-In Roll Bar

https://farm9.staticflickr.com/8807/...3a8f467d_h.jpg
https://farm9.staticflickr.com/8761/...6c2f8f3d_h.jpg

Features

• 1.625" x 0.095" 4130 chrome moly steel tubing utilized for excellent strength to weight ratio
• TIG welded and utilizes "X" braces on both front and rear sections for superior strength and rigidity
• Mounts to frame structure (utilizing factory bolts) to provide strongest mounting points and maximum protection
• Utilizes laser cut mounting plates & inner diameter tube clamps that are CNC turned and milled for a precise fit
• Designed to work with stock seats or any aftermarket seats on the market
• Allows full seat travel to accommodate taller drivers
• Can be used with stock seat belts or 6 point harnesses for track use
• Designed to work with wrap-around style harnesses while optional eyelet bolt provisions are available for clip-in harnesses
• OEM fit & finish. The main hoop contours entire arch of the roof with an even 3/16 inch gap
• Finished in satin black powder coat. Other colors available Bolt-in installation requires no drilling and minimal carpet trimming
• Made in USA

https://c1.staticflickr.com/9/8788/1...09713ea2_h.jpg
https://c2.staticflickr.com/8/7725/1...a4917944_h.jpg
https://c1.staticflickr.com/9/8693/1...98d72851_h.jpg
https://c1.staticflickr.com/9/8730/1...2d10b6eb_h.jpg
https://c1.staticflickr.com/9/8768/1...6ce6f805_h.jpg

About Alekshop
Attachment 1

Shop Address:
4390 Technology Drive
Fremont, CA 94538
Get Driving Directions

Phone Number:
(925) 609-4559

Links:
www.alekshop.com
www.facebook.com/alekshop/
www.instagram.com/alekshop_com

- Jerry@BBiAutosport.com