SP Motorsport's Purple Salzburg 991.2 GT3 Track Build
#1
SP Motorsport's Purple Salzburg 991.2 GT3 Track Build
Attachment 1
SP Motorsport's Purple Salzburg 991.2 GT3 Track Build with BBi Autosport Roll Bar and BBS Magnesium Wheel Track Package
In collaboration with SP Motorsports, we would shared their new stunning 2018 991.2 GT3 build with the legendary Salzburg livery in Purple. To turn her into a track monster, SP Motorsport installed our complete BBi Autosport StreetCup Roll Safety Package along with a custom exhaust system, BBS Magnesium Monoblocks Wheels, Motion Control Suspension (MCS) coilovers, and many more. Located in Northern California, we are proud to have SP Motorsports as one of our premiere dealers in the country representing our complete line of performance and safety upgrades. Here are some glamour shots of the build.
BBi Autosport Porsche 991 GT3 StreetCup II Bolt-In Roll Bar
Features
BBi Porsche 991 GT3/ GT3RS / Cayman GT4 Sub-Strap Mount
If you have the optional Sport Bucket seats and planning to install 6-point race harnesses, then you will need this bracket. This bracket bolts directly to the seat and keeps the harnesses at the proper 10-20° angle regardless of the seat position.
Schroth Racing Profi-II HANS Harness, Porsche GT3 Specific
Porsche GT3 Cup Cars come with Schroth belts direct from the factory. They are specific because of the lap belt attachment. They have a sewn-in bracket that fits perfectly on the factory mount. Standard belts require additional fabrication and a spacer to make them work. These are a bolt-in replacement which is much easier. The sub-straps have no adjusters to fit correctly in the vehicle, and the shoulder belts are shorter to reach the works cages with minimal excess.
Features
About SP Motorsports
1840 National Avenue
Hayward, CA, 94545 US
Phone: 510.782.0188
Fax: 510.785.8735
Email: info@spmsracing.com
Web Site: www.spmsracing.com
Facebook: www.facebook.com/spmsracing
- Jerry@BBiAutosport.com[/FONT]
SP Motorsport's Purple Salzburg 991.2 GT3 Track Build with BBi Autosport Roll Bar and BBS Magnesium Wheel Track Package
In collaboration with SP Motorsports, we would shared their new stunning 2018 991.2 GT3 build with the legendary Salzburg livery in Purple. To turn her into a track monster, SP Motorsport installed our complete BBi Autosport StreetCup Roll Safety Package along with a custom exhaust system, BBS Magnesium Monoblocks Wheels, Motion Control Suspension (MCS) coilovers, and many more. Located in Northern California, we are proud to have SP Motorsports as one of our premiere dealers in the country representing our complete line of performance and safety upgrades. Here are some glamour shots of the build.
BBi Autosport Porsche 991 GT3 StreetCup II Bolt-In Roll Bar
Features
- 1.625" x 0.095" 4130 chrome moly steel tubing utilized for excellent strength to weight ratio
- TIG welded and utilizes "X" braces on both front and rear sections for superior strength and rigidity
- Mounts to frame structure (utilizing factory bolts) to provide strongest mounting points and maximum protection
- Utilizes laser cut mounting plates & inner diameter tube clamps that are CNC turned and milled for a precise fit
- Designed to work with stock seats or any aftermarket seats on the market
- Allows full seat travel to accommodate taller drivers
- Can be used with stock seat belts or 6 point harnesses for track use
- Designed to work with wrap-around style harnesses while optional eyelet bolt provisions are available for clip-in harnesses
- OEM fit & finish. The main hoop contours entire arch of the roof with an even 3/16 inch gap
- Finished in satin black powder coat. Other colors available Bolt-in installation requires no drilling and minimal carpet trimming
- Made in USA
BBi Porsche 991 GT3/ GT3RS / Cayman GT4 Sub-Strap Mount
If you have the optional Sport Bucket seats and planning to install 6-point race harnesses, then you will need this bracket. This bracket bolts directly to the seat and keeps the harnesses at the proper 10-20° angle regardless of the seat position.
Schroth Racing Profi-II HANS Harness, Porsche GT3 Specific
Porsche GT3 Cup Cars come with Schroth belts direct from the factory. They are specific because of the lap belt attachment. They have a sewn-in bracket that fits perfectly on the factory mount. Standard belts require additional fabrication and a spacer to make them work. These are a bolt-in replacement which is much easier. The sub-straps have no adjusters to fit correctly in the vehicle, and the shoulder belts are shorter to reach the works cages with minimal excess.
Features
- Shoulder: HANS Specific 2" tapered to 3" Shoulders
- Lap: Sewn-in B43A (GT3 Specific Hardware)
- Sub belts: LV11 with B14 Snap-in Bracket Wrapped-in
- Include hardware: 1 SG23 7/16" Eyebolt, 1 S3 Wavy Washer
- Available with Pull-Down lap belts only
About SP Motorsports
1840 National Avenue
Hayward, CA, 94545 US
Phone: 510.782.0188
Fax: 510.785.8735
Email: info@spmsracing.com
Web Site: www.spmsracing.com
Facebook: www.facebook.com/spmsracing
- Jerry@BBiAutosport.com[/FONT]
Thread
Thread Starter
Forum
Replies
Last Post
BBiAutosport
Boxster / Cayman
1
02-09-2018 01:24 PM
BBiAutosport
GT3/GT2
0
12-30-2017 12:44 PM
Fabspeed Motorsport
Northeast
3
07-14-2010 11:35 AM