I am looking for some allingment input for my GT3 for the track and autocrossing. I know that these are 2 different set-ups...I am looking for a compramise. In stock form it feels like the front needs to be toe'd out and some negative camber needs to be dialed in as well. I have not taken tire temps yet. My first track event is not until next month. Thanks, Karl


Side question: How does one post a photo. Every time I try I get a file too large error message. I am down to 72DPI and minimal dimensions. I see far larger files posted all over this site! Thanks.

 

Karl, I haven't been successful in posting pix, so you are not alone.

Here is a very aggressive track set up, you can take this to you shop, and ask for a compromise between this and the street spec set up.

Front axle:
Camber: -2.5º
Max camber difference, left/right: 5'

Toe total: +5'
Toe difference at 20° lock: -1°20' +/- 30'

Caster: 8° +/- 30'
Max caster difference, left/right: 30'

Front height: 115mm
Swaybar – 1 from hard

Rear axle:
Toe total: 35’ +/- 2'
Max toe difference, left/right: 5'

Camber: -2.3° +/- 5'
Max camber difference, left/right: 10'

Rear height: 128mm
Swaybar – 1 from hard

 

Karl, you can't post pics using the quick reply box unless you have pics you can point to on another server. Here's what you can do. Either click on "Reply" or "Quote"...When the box comes up, scroll to the bottom and you will see a little box that says "Attach file". Click on browse and find the pic you want on your PC. As long as the image is not greater than 1045876 bytes
you can post it. In order to tell the size of your photo you want to post...open up the photo in a browser and right click select properties on it. It will tell you its size. It also can not be bigger than 800 x 600 pixels in resolution I believe...