Would aftermarket springs void my CPO warranty?
#3
Magnuson Moss Act. Quote/
The federal minimum standards for full warranties are waived if the warrantor can show that the problem associated with a warranted consumer product was caused by damage while in the possession of the consumer, or by unreasonable use, including a failure to provide reasonable and necessary maintenance End quote/
This also covers the manufacturer on modifications.
The federal minimum standards for full warranties are waived if the warrantor can show that the problem associated with a warranted consumer product was caused by damage while in the possession of the consumer, or by unreasonable use, including a failure to provide reasonable and necessary maintenance End quote/
This also covers the manufacturer on modifications.
#4
Got it, thanks guys. I'm just not used to having ~2" wheel gap and just itching to get it lowered. Need to do a bit more research on what other options are out there aside from H&R, one that probably has a more modest drop.
#6
Thanks for the suggestion cerbomark but my setup is quite aggressive already. I have 265 and 315 on 22" wheels, both with +45 offset and it's already pushing the wheels slightly outside the fender/wheel well. I think I am reconsidering springs and will just let it be for now. Below are the rear and front pics for reference:
Last edited by mocsman; 06-18-2017 at 08:40 PM.
Thread
Thread Starter
Forum
Replies
Last Post
tjg81296
997 Turbo / GT2
2
03-29-2017 12:22 PM