6SpeedOnline - Porsche Forum and Luxury Car Resource

6SpeedOnline - Porsche Forum and Luxury Car Resource (https://www.6speedonline.com/forums/)
-   Panamera (https://www.6speedonline.com/forums/panamera-75/)
-   -   DIY:Porsche logo door courtesy light swap (https://www.6speedonline.com/forums/panamera/428151-diy-porsche-logo-door-courtesy-light-swap.html)

DogWood 02-22-2019 10:48 PM

got them from Amazon

$17 prime

DogWood 02-22-2019 10:52 PM

Looks like the Porsche lawyers have caught on, they are hard to find on ebay now

Kayvan1347 02-22-2019 11:57 PM

Thanks
i just ordered two pairs from all 4 doors. I think it just plug and play. Connections are the same and no wiring issue?
Thanks

DogWood 02-23-2019 12:00 AM

connectors where the same for my 2010 - typical Chinese quality though, needed to bend the pins for the connectors

Kayvan1347 02-23-2019 12:09 AM

Mine is 2013 model should as the same as yours. What do mean you had bend the pins. Which pins? Then if you want to put the original back later on will be ok? Now I am worry a little bit. I don’t want to change or damage anything.
Do they come with LED bulb?
Thanks

LGARCIA 02-23-2019 06:23 AM

They come ready to go with the bulb. I didnt have any issues with the pins, the plastic connectors slid right in. I got mine from eBay

Kayvan1347 02-23-2019 08:53 AM


Originally Posted by LGARCIA (Post 4767896)
They come ready to go with the bulb. I didnt have any issues with the pins, the plastic connectors slid right in. I got mine from eBay

hi
could let me know the link you ordered from.
Thanks

DogWood 02-23-2019 09:19 AM

the pins on the light that plug into the wire harness, they where just sticking out a bit crooked and the plug wouldn't slide in - simple to just push them over a bit with a small screwdriver.
Nothing to worry about

Kayvan1347 02-23-2019 10:36 AM


Originally Posted by DogWood (Post 4767909)
the pins on the light that plug into the wire harness, they where just sticking out a bit crooked and the plug wouldn't slide in - simple to just push them over a bit with a small screwdriver.
Nothing to worry about

hi
ok then. Did you say the LED bulbs comes with it or I need to buy them separately.
Thanks

DogWood 02-23-2019 11:07 AM

they come with it, all you need to do is pop out the original light housing and install the new one

DogWood 02-23-2019 05:03 PM

Looks like there is still plenty left on Aliexpress

DogWood 02-27-2019 06:49 PM

Did the back doors, ordered from a different vendor who's add showed a circle around the logo, lights I got don't have that, bit disappointed
whoever the logo is a bit bigger and the gold is more gold colored.
overall I'm happy, nice inexpensive bling :)
https://cimg1.ibsrv.net/gimg/www.6sp...26ec8891d6.jpg
top backdoor, bottom front
https://cimg3.ibsrv.net/gimg/www.6sp...30c9c6a20b.jpg

LGARCIA 02-27-2019 06:54 PM

You got it done, cool!

DogWood 02-27-2019 06:58 PM

thanks, should have had it done on Monday, but the massive snow we've gotten the last couple of days kept the mailman away

Kayvan1347 03-11-2019 12:57 AM

Mine is done too and I like it a lot.
Thanks for the infos.


All times are GMT -6. The time now is 05:25 PM.


© 2024 MH Sub I, LLC dba Internet Brands