E Brake fault light after replacing rear pads
 

Replaced pads and sensors , can not get this to go away even with Porsche scanner tool
https://cimg3.ibsrv.net/gimg/www.6sp...01a7cfa8dd.jpg

There’s a series of steps on a bulletin on the Tech Info Site that is supposed to be followed in order. Son said I could borrow his computer when we get to the hotel.

1. Parking brake from Overview
2. Drive links > Move to installation position
3. Maintenance repairs > Check basic setting
repeat 2 and 3 until basic setting is within spec
then continue
4. Maintenance repairs > Loop in (Grind in)
5. Maintenance repairs > Calibration

cycle ignition then clear faults

Thank you will have my tech try this when he returns.

I had the error show up randomly a few times, but it's always worked and the fault has never stayed on. I'll have the dealer look at it next time - but guessing it's all fine just some sensor has a funky input or something.

usually sensors on these cars, and control arms. TPMS is annoying as well, but the car is so solid otherwise