F/S HRE C20's 996TT/GT2/C4S Fitment
#1
F/S HRE C20's 996TT/GT2/C4S Fitment
Category: Wheels & Tires
Price: $3900
Private or Vendor Listing: Private Listing
Part fits: Porsche 911 997 Turbo, Porsche 911 996 Turbo
Location (State): NJ
Item Condition: Used
Shipping Information: Item can be shipped
$3,900.00 WHEELS AND TIRES
I have a set of HRE C20 Wheels in GT2 sizes 18X12 rears and 18X8.5 fronts mounted on Nitto NT01's with approximately 500 miles on the tires. Wheels are in perfect condition and are as clean as they come. Rears have a 4" lip and are extremely light. Rear offsets are a little more aggressive than stock GT2 sizes but do not rub on my car even extremely lowered. Polished lips and Matte Black centers done by HRE. Asking $4,800 with tires and $4,000 for just the wheels. Wheels have the Orange Electronic TPMS sensors.
Last edited by TonyNJ; 01-23-2010 at 09:21 AM. Reason: Reduced Price
#7
Great looking wheels and STUNNING car!
What caused the rash on the pictured wheel (is that a front wheel?). Any other issues with the wheels.
Please let me know the weight and offsets and if the rears would rub on a 01 996tt (stock ride height but will be lowering with coilovers). Also, what are the tire sizes. Mainly concerned with the rears.
Looking for lightweight track wheels but concerned with the 12" width on the rears.
Thanks!
What caused the rash on the pictured wheel (is that a front wheel?). Any other issues with the wheels.
Please let me know the weight and offsets and if the rears would rub on a 01 996tt (stock ride height but will be lowering with coilovers). Also, what are the tire sizes. Mainly concerned with the rears.
Looking for lightweight track wheels but concerned with the 12" width on the rears.
Thanks!
Trending Topics
#8
Great looking wheels and STUNNING car!
What caused the rash on the pictured wheel (is that a front wheel?). Any other issues with the wheels.
Please let me know the weight and offsets and if the rears would rub on a 01 996tt (stock ride height but will be lowering with coilovers). Also, what are the tire sizes. Mainly concerned with the rears.
Looking for lightweight track wheels but concerned with the 12" width on the rears.
Thanks!
What caused the rash on the pictured wheel (is that a front wheel?). Any other issues with the wheels.
Please let me know the weight and offsets and if the rears would rub on a 01 996tt (stock ride height but will be lowering with coilovers). Also, what are the tire sizes. Mainly concerned with the rears.
Looking for lightweight track wheels but concerned with the 12" width on the rears.
Thanks!
#11
TonyNJ, please provide offsets and weights on the wheels. Were the NT01's used on the street or track?
As previously mentioned, concerned with rubbing. Car is currently at stock height with stock suspension. Trying to decide on coilovers (JIC/Cross, KW's or PSS 10) and will lower the car about 1" to 1.25" depending on recommendations of the shop I'll use to set up the suspension.
If you can provide this information, I'll talk to my shop and get their thoughts re these wheels.
Cheers!
As previously mentioned, concerned with rubbing. Car is currently at stock height with stock suspension. Trying to decide on coilovers (JIC/Cross, KW's or PSS 10) and will lower the car about 1" to 1.25" depending on recommendations of the shop I'll use to set up the suspension.
If you can provide this information, I'll talk to my shop and get their thoughts re these wheels.
Cheers!
#14
TonyNJ, please provide offsets and weights on the wheels. Were the NT01's used on the street or track?
As previously mentioned, concerned with rubbing. Car is currently at stock height with stock suspension. Trying to decide on coilovers (JIC/Cross, KW's or PSS 10) and will lower the car about 1" to 1.25" depending on recommendations of the shop I'll use to set up the suspension.
If you can provide this information, I'll talk to my shop and get their thoughts re these wheels.
Cheers!
As previously mentioned, concerned with rubbing. Car is currently at stock height with stock suspension. Trying to decide on coilovers (JIC/Cross, KW's or PSS 10) and will lower the car about 1" to 1.25" depending on recommendations of the shop I'll use to set up the suspension.
If you can provide this information, I'll talk to my shop and get their thoughts re these wheels.
Cheers!