FS: H&R lowering springs, these were on the car less than 100 miles
#1
FS: H&R lowering springs, almost new in box :good photos:
Category: Steering & Suspension
Price: $199
Private or Vendor Listing: Private Listing
Part fits: Porsche 911 997 Turbo, Porsche 911 997 Non-Turbo
Location (State): ID
Item Condition: Used
Shipping Information: Item can be shipped
I had these installed on my car; absolutely love the look of the car, but the 1.25 inch drop was too much for me, couldn’t get into my driveway without scratching my Ruf front bumper. I wish I had a lower valance, and I would have kept them, it made me cringe every time I scrapped the bottom of that not-so-cheap front bumper. Took them off within the same week of installing them.
I know a lot of people love them, and this is the biggest complaint I’ve heard of; scraping. Some don’t have as steep of drive as I do, and most have a lower spoiler (ex. the turbo). Ride was nice and soft, with a bit tighter feel for better response.
From HR
H&R Sport Springs Porsche 997 C4 & C4S 06+
Every spring produced by H&R comes from the H&R ISO 9001 certified engineering and manufacturing facility in Germany. All H&R springs are produced from a special 54SiCr6 spring steel, which has strength rated at 290,000 psi resulting in unrivaled tensile strength and resiliency.
At H&R product design and development is of the highest importance. All H&R springs are "cold" wound on specially designed CNC machinery and then time-tempered to re-align the molecular structure of the steel to ensure quality and durability.
All springs are shot-peened to increase the service life of each spring by more than 200%. Each spring is then sent through the H&R exclusive "SuperBlok" system, which cycles each spring to ensure that sagging will never occur. Lastly, the H&R special powder coating process coats each spring with a flexible and durable finish that is highly resistant to corrosion, chips, and scratches. At H&R we care about quality - the whole production process, from start to finish, is done in-house to ensure the most consistent, highest quality product possible.
H&R Sport Springs offer the handling characteristics and aggressive appearance that you’ve been looking for, without the harsh ride characteristics of less-advanced spring systems. H&R Sport Springs feature more control and are engineered for the street, making them comfortable and fun to drive. H&R Sport Springs are crafted from a special 54SiCr6 spring steel to ensure quality and performance.
Features:
Superb ride quality
Lowers Front: 1.2"
Lowers Rear: 1.2"
Every spring produced by H&R comes from the H&R ISO 9001 certified engineering and manufacturing facility in Germany. All H&R springs are produced from a special 54SiCr6 spring steel, which has strength rated at 290,000 psi resulting in unrivaled tensile strength and resiliency.
At H&R product design and development is of the highest importance. All H&R springs are "cold" wound on specially designed CNC machinery and then time-tempered to re-align the molecular structure of the steel to ensure quality and durability.
All springs are shot-peened to increase the service life of each spring by more than 200%. Each spring is then sent through the H&R exclusive "SuperBlok" system, which cycles each spring to ensure that sagging will never occur. Lastly, the H&R special powder coating process coats each spring with a flexible and durable finish that is highly resistant to corrosion, chips, and scratches. At H&R we care about quality - the whole production process, from start to finish, is done in-house to ensure the most consistent, highest quality product possible.
H&R Sport Springs offer the handling characteristics and aggressive appearance that you’ve been looking for, without the harsh ride characteristics of less-advanced spring systems. H&R Sport Springs feature more control and are engineered for the street, making them comfortable and fun to drive. H&R Sport Springs are crafted from a special 54SiCr6 spring steel to ensure quality and performance.
Features:
Superb ride quality
Lowers Front: 1.2"
Lowers Rear: 1.2"
$199 plus $30 shipping anywhere in the lower 48 US = $229 to you
thanks for looking!
Last edited by neijia; 01-25-2010 at 05:57 PM. Reason: changing the title a bit
#4
Hi drkside, I just checked the H&R website; the part number for this set is 54097... will fit Porsche 997 C4/C4S only. Different part number for the RWD. thanks for looking though.
#7
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
awdbiturbo1
Automotive Parts & Accessories For Sale/Wanted
5
02-18-2016 10:24 AM
turbosonoma
Automotive Parts & Accessories For Sale/Wanted
9
08-19-2015 02:05 PM