SIZE OF SPACERS TO HOLLOW TWIST's TO GET "GT2" STYLE
 

What size of spacers do you guys use to space out so it look like the GT2???

I did the 6mm spacers from Boothe Designs...
http://boothedesign.com/spacers.html

I also picked up the lug bolts and they look great..
http://boothedesign.com/boltsstudslugs.html

I've used 6mm front and 17 rears..both supplied by dealer.

You used these on the Turbo Twist Wheels? Did you rubb at all?

I have 18mm spacer at rear, no rubb ! Orginal wheels !

I just got a answer form a dealer.. And they says 15mm in front and 18 mm rear.. And i need to roll .. to avoid rubbing.. As mine is also going to be lowerd as a GT2...

just curious...do you guys feel anything different when you add the spacers (e.g. shaking...) also with 18mm spacers what size bolt do you need to get for the wheels?

18mm longer bolts ! ( was included with the spacers ) Nothing different (e.g. shaking...) accept better looking car !

:p I know 18mm longer bolts hilarious I guess I should have added, I have no clue how long the stock bolts are :D

I need to get me some spacers!

Apparently adding spacers improves handling as the car track is wider??

so you guys are using spacers on your factory set-up..........

Lots of variables here.
If you go real low, & have not stiffened your suspension, & are running any respectable neg. camber.....18" spacer in the rear added to reg 45mm offset hollows will cause you more trouble than fender prep can solve.
GT2 height is 113F (+-5mm) and 138R (+-5mm)......if you stay up a bit, stiffen, not so much neg cam....any one or como of the 3 & you may be OK.
Suggestion.....a future plan to order wheels with your desired offset....put the 18" spacers on the shelf.