My new BBI Autosport Exhaust on my EVOMS GT700 - Video Clips
Thread Starter
|
Registered User
Joined: Aug 2007
Posts: 1,797
From: LA/OC
Rep Power: 146
My new BBI Autosport Exhaust on my EVOMS GT700 - Video Clips
Finally got the car back from EVOMS w/ the GT700 kit. Thanks Todd!!
I've heard good things about custom exhaust systems by Betim at BBI Autosport.
I contacted Betim a few weeks ago, and told him i wanted an exhaust that would eliminate as much restriction as possible regardless of loudness. Basically something that would be made strictly for power. This is the system he crafted for me.....
Below is the Dyno Sheet for the Miltek vs the Custom BBI system. First i would like to thank Todd Z and Evolution Motorsports again for building such a strong car, and taking so much time to ensure it had reached its full potential. I would also like to thank Betim and BBI Autosport for building me this custom exhaust system and being a local shop that always makes time to maintain my car. These results have left me quite speechless. Also remember this power was made on a GT700 w/ all the bolts on.
VIDEOS
10/15/08 2ND to 3RD Gear Pull - wheel spin... (Inside Car Video)
http://www.youtube.com/watch?v=0muDdWsJ8yo
10/15/08 2ND Gear Pull (Inside Car Video)
http://www.youtube.com/watch?v=JWl1XOPZrQU
10/16/08 3RD Gear Pull (Outside Car Video)
http://www.youtube.com/watch?v=xsJUUEbVsq0
New Video(s) Updated - 10/18/08
Gear Pull (Outside Car Video) <-- This is my favorite video of the bunch. Enjoy
http://www.youtube.com/watch?v=xutuAA6atxc
Contact Information:
Evolution Motorsports
www.evoms.com
1625 E. Weber Dr.
Tempe, AZ 85281
(480) 317-9911
BBI Autosport
www.bbiautosport.com
17141 Palmdale St.
Huntington Beach, CA 92647
(714) 843-0200
I've heard good things about custom exhaust systems by Betim at BBI Autosport.
I contacted Betim a few weeks ago, and told him i wanted an exhaust that would eliminate as much restriction as possible regardless of loudness. Basically something that would be made strictly for power. This is the system he crafted for me.....
Below is the Dyno Sheet for the Miltek vs the Custom BBI system. First i would like to thank Todd Z and Evolution Motorsports again for building such a strong car, and taking so much time to ensure it had reached its full potential. I would also like to thank Betim and BBI Autosport for building me this custom exhaust system and being a local shop that always makes time to maintain my car. These results have left me quite speechless. Also remember this power was made on a GT700 w/ all the bolts on.
VIDEOS
10/15/08 2ND to 3RD Gear Pull - wheel spin... (Inside Car Video)
http://www.youtube.com/watch?v=0muDdWsJ8yo
10/15/08 2ND Gear Pull (Inside Car Video)
http://www.youtube.com/watch?v=JWl1XOPZrQU
10/16/08 3RD Gear Pull (Outside Car Video)
http://www.youtube.com/watch?v=xsJUUEbVsq0
New Video(s) Updated - 10/18/08
Gear Pull (Outside Car Video) <-- This is my favorite video of the bunch. Enjoy
http://www.youtube.com/watch?v=xutuAA6atxc
Contact Information:
Evolution Motorsports
www.evoms.com
1625 E. Weber Dr.
Tempe, AZ 85281
(480) 317-9911
BBI Autosport
www.bbiautosport.com
17141 Palmdale St.
Huntington Beach, CA 92647
(714) 843-0200
Last edited by NineNineSixTT; Apr 2, 2009 at 12:03 AM.
Registered User
Joined: Nov 2007
Posts: 844
From: ca
Rep Power: 130
Finally got the car back from EVOMS w/ the GT700 kit.
I've heard good things about custom exhaust systems by Betim at BBI Autosport.
I contacted Betim a few weeks ago, and told him i wanted an exhaust that would eliminate as much restriction as possible regardless of loudness. Basically something that would be made strictly for power. This is the system he crafted for me.....
2ND to 3RD Gear Pull - Alots of wheel spin...
http://www.youtube.com/watch?v=0muDdWsJ8yo
2ND Gear Pull
http://www.youtube.com/watch?v=JWl1XOPZrQU
I had dynos done back-to-back versus my miltek catless system. The results were shocking and suprising, to say the least....
Let me know what you guys think....
I've heard good things about custom exhaust systems by Betim at BBI Autosport.
I contacted Betim a few weeks ago, and told him i wanted an exhaust that would eliminate as much restriction as possible regardless of loudness. Basically something that would be made strictly for power. This is the system he crafted for me.....
2ND to 3RD Gear Pull - Alots of wheel spin...
http://www.youtube.com/watch?v=0muDdWsJ8yo
2ND Gear Pull
http://www.youtube.com/watch?v=JWl1XOPZrQU
I had dynos done back-to-back versus my miltek catless system. The results were shocking and suprising, to say the least....
Let me know what you guys think....
Registered User
Joined: Mar 2008
Posts: 207
From: Sydney
Rep Power: 35
What ^ he said, any video from outside?
Trending Topics
Thread Starter
|
Registered User
Joined: Aug 2007
Posts: 1,797
From: LA/OC
Rep Power: 146
Thanks for all the comments guys !
I'll try and make a 3rd to 4th gear outside car video in the next couple of days...
Drew, if you want to do one at horse thief mile at willow, I got a couple buddies renting a private day.
I'll try and make a 3rd to 4th gear outside car video in the next couple of days...
Drew, if you want to do one at horse thief mile at willow, I got a couple buddies renting a private day.
Oh yeah. Betim did a few for my customers and it is awesome. Well built and good power. With that said the cool part is that you get a combination GT-3 AND Turbo sound. Wait till you hear the outside vids guys.
Banned
Joined: Nov 2003
Posts: 1,054
From: On the beach
Rep Power: 76
I gotta hear this in person. If this is really as good as the video sound I might have to bite the bullet and write a check.
I loved the sound of my GT3 with the GMG center section. If this gives me that kind of sound......
I loved the sound of my GT3 with the GMG center section. If this gives me that kind of sound......
