Tial alpha 3076's are on and WOW
Registered User
Joined: Jul 2009
Posts: 2,058
From: Florida
Rep Power: 125
Did you run external wastegates with this setup??
just wanted to give a shout out to jake and the guys over at Tial Sport for putting together a top notch complete turbo kit the craftsmanship is amazing.. i was really impressed! the part that made me the most nervious was the waterline install but with there adapters and fittings made it real straight forward ... the turbos came with hanger brackets oil line and tank adapters preset 1 bar wg actuators everything needed was in the kit Great Job Tial!!
After a custom tune from todd over at protmotive and the rain letting up i finally had a chance on monday to turn it up 1.4 bar (110 octane) and let her eat... all i can say its scary AWD sideways in 2nd with new tires scary !! when you mat it in 3rd grear be sure your pointing straight and there is no one in front of you for a long way.... as for delivery the power is linear (thanks to the quick spool ball bearing CHRA) and it just does not choke on top i am very impressed and it may be the last set of turbos my hotrod gets
total install time including porting my headers 8 hours... i would recomend this kit to anyone loking for a topnotch high tech well put together turbo pkg that makes awesome power.. not even in the same ballpark as the k24/20gs i replaced
thanks Tial and Protomotive
tim
After a custom tune from todd over at protmotive and the rain letting up i finally had a chance on monday to turn it up 1.4 bar (110 octane) and let her eat... all i can say its scary AWD sideways in 2nd with new tires scary !! when you mat it in 3rd grear be sure your pointing straight and there is no one in front of you for a long way.... as for delivery the power is linear (thanks to the quick spool ball bearing CHRA) and it just does not choke on top i am very impressed and it may be the last set of turbos my hotrod gets
total install time including porting my headers 8 hours... i would recomend this kit to anyone loking for a topnotch high tech well put together turbo pkg that makes awesome power.. not even in the same ballpark as the k24/20gs i replaced
thanks Tial and Protomotive
tim
Registered User
Joined: Nov 2006
Posts: 8,083
From: Texas
Rep Power: 673
These turbos and a full 3 inch exhaust are possibly my next mods.
Registered User
Joined: Oct 2005
Posts: 2,726
From: Michigan
Rep Power: 416
Sean, seems like a waste of money if you are not willing to turn up the boost on your motor. The turbos are a great unit, I have had a great experience with them, but I would think there would be little, if any,difference at the 1.5 bar you are comfortable running compared to the straight 76r's that you have. BTW, how did the last round of upgrades turn out? Any improvement to the 60-130, I only ask since I have been so busy recently I havent followed much on the board and may have missed your thread.....
