6SpeedOnline - Porsche Forum and Luxury Car Resource

6SpeedOnline - Porsche Forum and Luxury Car Resource (https://www.6speedonline.com/forums/)
-   996 Turbo / GT2 (https://www.6speedonline.com/forums/996-turbo-gt2-2/)
-   -   From a stock 996 tt... to it's final stages of modding. (https://www.6speedonline.com/forums/996-turbo-gt2/210063-stock-996-tt-its-final-stages-modding.html)

f1crazydriver May 4, 2010 05:28 PM

From a stock 996 tt... to it's final stages of modding.
 
Since stock I have done the following, i would like your guys input in what to address before i make my final list of modifying the car, their has to be an end to it !. Also, what do you guys suggest in removing weight but still keeps the OEM look. I know i do not have coilovers listed but that is something i'm waiting on to decide what route to go with. Mosly waiting on Dez. I'm putting up the list so i can get suggestions of perhaps somethings i have over seen, that would be a good idea to mod. The car is my DD and Track car.:)

Currently Have:

-997 SSK
-Gt3 seats
-Straight pipes
-Gt2/3 front control arms
-MBarts Rear solid control arms.
- c4s front lip
-UMW flash
-Dry cell battery
-gt2 front brake ducs
-6 pot brakes,
-350mm rotors all around
-no rear seats
-rear wiper delete
-UMW Lwfw
-Ruf springs
-Rear bumperrets removed
-stainless steal brakelines
-black wheels
-clear corner
-chrome bulbs but flash yellow
-black turbo badge
-eibach sway bars f/r


Future mods:

-MBarts front solid bushing steer links- hopefully on my hands by this week !
-MBarts fixed rear wing. (top secret hehe)- Hopefully this will help a lot of people with hydralic rear failures, and for pp wanting to save weight like myself but keeping stock deck!
-OZ wheels
-Semi-solid Motor mounts
-front downforce lip
-intercoolers
-remove front bumper shocks
-rear diffuser
-rear subframe brace mbarts

Basic May 4, 2010 06:18 PM

What rear diffuser are you planning on using?

buddyg May 5, 2010 07:43 AM

For the track I would use some Pagid pads or something similar & 5 point harnesses.

The rest looks good, unless you are going to bigger turbos.

007-911 May 5, 2010 11:46 AM


Originally Posted by f1crazydriver (Post 2828239)
Since stock I have done the following, i would like your guys input in what to address before i make my final list of modifying the car, their has to be an end to it !. Also, what do you guys suggest in removing weight but still keeps the OEM look. I know i do not have coilovers listed but that is something i'm waiting on to decide what route to go with. Mosly waiting on Dez. I'm putting up the list so i can get suggestions of perhaps somethings i have over seen, that would be a good idea to mod. The car is my DD and Track car.:)

Currently Have:

-997 SSK
-Gt3 seats
-Straight pipes
-Gt2/3 front control arms
-MBarts Rear solid control arms.
- c4s front lip
-UMW flash
-Dry cell battery
-gt2 front brake ducs
-6 pot brakes,
-350mm rotors all around
-no rear seats
-rear wiper delete
-UMW Lwfw
-Ruf springs
-Rear bumperrets removed
-stainless steal brakelines
-black wheels
-clear corner
-chrome bulbs but flash yellow
-black turbo badge
-eibach sway bars f/r


Future mods:

-MBarts front solid bushing steer links- hopefully on my hands by this week !
-MBarts fixed rear wing. (top secret hehe)- Hopefully this will help a lot of people with hydralic rear failures, and for pp wanting to save weight like myself but keeping stock deck!
-OZ wheels
-Semi-solid Motor mounts
-front downforce lip
-intercoolers
-remove front bumper shocks
-rear diffuser
-rear subframe brace mbarts


Please tell me more. My decklid has out for the second time!

f1crazydriver May 5, 2010 12:04 PM


Originally Posted by buddyg (Post 2828797)
For the track I would use some Pagid pads or something similar & 5 point harnesses.

The rest looks good, unless you are going to bigger turbos.

Buddy, first- nice to see you back here :) . I already have Pagid RS-19s front and RS 15s black on the rear. But pads i consider wear and tear hilarious


Originally Posted by Basic (Post 2828277)
What rear diffuser are you planning on using?

Dez and myself are working on one for ours cars. Not sure if theirs a market for it, and i don't have the intensions of selling it. Plus i'm not a sponsor.


Originally Posted by 007-911 (Post 2829146)
Please tell me more. My decklid has out for the second time!


I'll pm you .

IloveSpeed May 15, 2010 08:15 PM

Enrique, you only have two engine mods? Flash and exhaust?

I wonder what your car would run in the 1/4 mile..... 12.0 @ 119?

f1crazydriver May 15, 2010 08:39 PM

Yes only ECU flash and exhaust in terms of power upgrades. I updated my new mod list.

Currently Have:

-997 SSK
-Gt3 seats
-Straight pipes
-Gt2/3 front control arms
-MBarts Rear solid control arms.
- c4s front lip
-UMW flash
-Dry cell battery
-gt2 front brake ducs
-6 pot brakes,
-350mm rotors all around
-no rear seats
-rear wiper delete
-UMW Lwfw
-Ruf springs
-Rear bumperrets removed
-stainless steal brakelines
-black wheels
-clear corner
-chrome bulbs but flash yellow
-black turbo badge
-eibach sway bars f/r
-MBarts adjustable rear solid toe links
-Rear brake ducs
-MBarts fixed rear wing

dfwerdoc May 15, 2010 10:05 PM

nice list of mods ...... posts some pics of the car with your additions.

Mad Ness May 16, 2010 10:11 AM

great list for footwork, giving me some ideas...

think going with CF or FRP composite doors would save a lot of weight. Not sure if there're any are avaialble which provision for all fixings, power windows and stuff. and not sure how much difference this may make in side impact situations. Most doors have a side crash bar inside of them.
Front bonnet to lightweight material, though not sure how heavy orig is. (997 one is alum)
on track days remove spare tire n rear seats
someone recently asked about lexan rear window...
How about a hard tranny mount - gbox is offering one but it's noisy =)

MishaDesigns May 18, 2010 03:53 AM

Nice. Let see the some pics!

f1crazydriver May 18, 2010 03:20 PM

The car looks pretty much bone stock, the look I was going after ;)

If you guys want other pictures, specify what I'll see if I have some.


http://i11.photobucket.com/albums/a1...4/DSC04532.png

ETW 360 May 18, 2010 03:33 PM

Looks good without rear bumperettes. Did you have to fill holes and repaint the bumper when you took them off?

Ray May 18, 2010 11:22 PM

if you're not planning for more power, weight reductions is what you're looking for. Your list look good, which OZ wheels are you planning to get?

For more front down force, we have CF aero lip available and that will add down force and only weight 3lbs! Let me know if you interest.

madden May 19, 2010 09:35 AM


Originally Posted by ETW 360 (Post 2845008)
Looks good without rear bumperettes. Did you have to fill holes and repaint the bumper when you took them off?


ya i love the no bumperette look, i though about painting them but i like this look a lot better

Zmonsta Jun 9, 2010 12:12 PM

I met F1crazydriver @ ThunderHill track last Friday.. And all I got to say that his car is wicked fast... He came down the front straight faster than anything out there that day, and not only does it goes straight fast, that puppy can turn.. And it doesn't help that he is an insanely fast and good driver! Very cool to have met him and his ride!! I need to score me a ride in it next time down!

Enjoy in good health!


All times are GMT -6. The time now is 06:36 PM.


© 2026 MH Sub I, LLC dba Internet Brands