Best x pipe exhausts
 

Hi guys,

Needing a bit advice.

Sold my milltek with cats and want a no holds barred x pipe, decat, straight through system.

What's my options and what's the best?

Steve

Here we go again. Lol

Sorry I'm new. Have I touched a nerve lol

I don't know if I can emotional take this

To save everyone from another X-pipe drama thread, I had a miltek exhaust on my previous 996tutbo and I was never impressed. I now have a EBWerks X-pipe with no cats or silencers and it sounds awesome, the best I have heard so far. Everyone that hears my car loves the way it sounds. It's loud but not straight pipe loud. I have not seen any dyno comparisons so I have no clue if the EBwerks is any better than the Miltek regarding HP performance.

Also look at 911tunings X-pipe. You must take inconsideration your HP goals as not every exhaust is designed to support high HP. If you befriend a tuner first, they will help you determine which exhaust is best for you. Listen to the exhaust they suggest and then make your purchase.

Hi, Search is your friend. :)
You will have many opinions and info to digest..
I will be doing a Dyno Comparison hopefully thus week between my 100 cell Milltek and a catless X pipe on my 18g set-up..

many options and various prices... They are not all the same....
good luck,
markski

Must... resist...!


-V

Hi Steve,

Here is a video link to our "no holds barred", full 3" X-Pipe - this system sounds fantastic and is a pure joy to experience! It's very light weight and constructed completely with smooth 3" stainless steel piping for maximum flow. The inlets of the bypass pipes are bumped to 3.2" and the flanges are ported after the turbo to eliminate the step after the turbo inherent in most 3" systems and provide for maximum flow. If you are looking for a "no holds barred" catless X-Pipe system, this is my recommendation...


Here it is catted, but we can substitute the cat bypass pipes....
https://www.6speedonline.com/forums/...ine=1369663158

Cat bypass pipes - flow matched to the 996TT turbos at the flange (note the bump in pipe diameter):
https://www.6speedonline.com/forums/...ine=1369663158

And you could choose our slash cut tips (pictured here) vs. our rolled edge tips (pictured above) - OEM or dual tips are an option, but on a full 3" system, they neck it down to less than 3":
https://www.6speedonline.com/forums/...ine=1369663158

i have an X pipe design destined for my car and hopefully it will sound like Speedtech's, that sounds great.

FWIW I run the SpeedTech 3" X-flow system with no cats and it is glorious. Great company to work with!

Alexei, Thanks for the kind words! The feeling is mutual...

Thanks, Steve - We are very pleased to be part of your GT2 race project!

2ND THAT! I love my catless SpeedTech 3" X-flow set up!

John,

can you please get a clip of the 3" CATLESS without muffler sound clip already!!

Thanks

Bobby Ali

ba

Hi Bobby,

I do intend to do one, hopefully in the next few weeks, if time allows...