I need info. Is there any reference out there as to how to do this?

 

From the topside, remove the upper black plastic panel in front of the trunk that is secured by the 4 plastic half-turn fasteners so that you can get at the screws underneath.

You need to remove the side markers, these just are pryed out by the rear edge, there are spring clips that hold them in. There are 2 screws behind them you need to remove.

There are also 2 screws in this area that come up from the bottom to be removed.

Then get under the car and remove the torx screws that you can see holding the bumper on. Also, there are 2 plastic fasteners with push pins that need to be removed as well.

It is really very simple and straightforward.

 

Here is a write-up with pics:

http://www.renntech.org/forums/index.php?showtopic=7070

 

Thanks So Much!!