Hey guys,
I still need some help with my HRE 840R's. The front wheel dimensions are:
19 x 8.5 with 34mm offset. tires are 19 x 235 x 35

The rear wheels are 19 x 11.5 with 31 mm offset. tires are 19 x 315 x 25

What are most of you running?

 

8.5x18" ET40 and 11x18" ET25. 225/40 and 295/30 tires and no problems with a low suspension (of course not with these tire sizes...)
The tires are PS2 for street and Cups for track.

If you have only a small problem with rubbing, a different alignment should help with those blingbling-wheels

 

Check out this thread: https://www.6speedonline.com/forums/...ad.php?t=77005

Mine is 19x8 46mm front.

and 19x11.5 44mm in the rear. You are running the same size rears with a 31mm offest. the 15mm spacers I tried looked very iffy in the rear even if I was to roll the fenders. Did you roll your rear fenders?

Does this mean that I can run a 13mm (doesn't exist) spacer in the rear an not rub? ...or is the offest divided by two to calculate at 6.5mm (they make 5 and 7mm spacers).

 

your offset is too low in the front, your wheel is completely flush with the fender isnt it?