AMS Product Release: AMS Porsche 996TT 1-Bar Wastegate Actuator Upgrade

Reply Subscribe

Thread Tools

Rate Thread

Jan 12, 2010 | 03:43 PM

Frank@AMS

Thread Starter

Former Vendor

Joined: Aug 2006

Posts: 36

From: Schaumburg

Rep Power: 0

Frank@AMS is infamous around these parts

***AMS Product Release: AMS Porsche 996TT 1-Bar Wastegate Actuator Upgrade***

The AMS 996TT 1 bar Wastegate Actuator Upgrade is a great way to add horsepower to your 996 Turbo. The OEM wastegate actuators are set at .7 bar which is fine on a stock vehicle but once the boost levels are raised, the OEM actuators will blow open under boost. This hurts performance by not allowing you to hold your target boost level to redline or even worse not allowing you to reach the desired level at all.

By upgrading to the AMS units, you will eliminate the possibility of your wastegates opening prematurely, ensure maximum boost all the way to redline and allow for pre-load adjustment. These are completely bolt on and will work on any 996 based turbo that utilizes the stock wastegate actuators.

Features

Allows turbos to achieve higher boost and hold target boost to redline for increased horsepower
Bolt on installation with pre-load adjustment

Applications

Porsche 996 Twin Turbo – Compatible with K16 and K24 based turbo’s.
Fits all USDM & EDM

Note: These wastegate actuators are designed to maintain higher than stock boost levels, AMS performance insists that your vehicle be re-tuned when installing these units to prevent engine damage.

$349.95

CLICK HERE TO PURCHASE