I was admiring the great job you did...and three days ago i sent you a pm asking how I could buy your products...Sadly enough there is still no reply...

 

Apologies. All pms replied to. Thank you.

 

You are more than welcome...that satin wrap on Gt silver GT2RS is simply awesome...

 

I'd like pictures of where you guys mounted the sensors if you have that?

 

Satin Guard™'s Dual Tone Technology (different sheen based on varying lighting is obvious in these photos). You can clearly see the satin white glowing in direct sunlight.

 

 

I have a 2011 911 Turbo S Cab in Carrera White. I would like to get the front wrapped. Any suggestions as to where to get that done?

Thanks

 

Again, we wrapped this 2011 GT2 RS with Satin Guard™, Diamond Cut IR Nano-tint, Passport 9500ci. How does our products / installations compare to others on the market? FAQ below:

Q: How do you maintain Satin Guard?
A: There is a specialized cleaner and soap solution, both which are inexpensive. Regular car wash soap works, but tends to leave oily streaks. The wash soap and cleaner works much better as it is designed to clean the pores of Satin Guard™

Q: Does it scratch like paint?
A: In short, no it does not swirl like paint. The product does have extensive protective capabilities like clear bra. However, it can be damaged like any film on the market

Q: I've heard of other satin vinyls. How does this compare?
A: Satin Guard™ is 2-3 times thicker than the various iterations of "satin" vinyl and films on the market.

Q: For the Passport 9500ci, where do you mount the laser diffusers? And what is the cost?
A: We custom flush mount it to the front and rear bumper. Details to this we do not reveal.
A: Cost is provided after an in-person consultation at our facilities

Q: How does Diamond Cut IR compare to some of the ceramic tints on the market?
A: Technology with ceramics was at the forefront of window film 5-8 yrs ago. Today, Diamond Cut IR has taken to a different level. The film blocks off 94% of infrared rays vs the top of the line ceramics film maker at 80%
A: Does not affect electronics as the technology built into Diamond Cut IR is completely different and does not utilize metals

Q: Will it damage the paint if I have to remove it?
A: If it is OEM paint, applying Satin Guard™ is fine. However, with aftermarket paint, it is possible that the paint would lift with poorer paint jobs (MAACO, Earl Scheib, etc....to name a couple).

Q: How much to have it installed?
A: Satin Guard™ is a highly customized application. It is a requirement for both Satin Guard™ and Clear Bra apps to have any new customers set up an appointment for consultation to obtain a quote.

Q: I'm not local to you. Would I be able to purchase the film from you?
A: Yes. As a matter of fact, we are already selling / shipping the film out stateside and globally. You would need to source out an excellent paint protection film installer for this.

Q: Can my local vinyl guy do this?
A: This is a highly skilled craft. To get it to the level in our photos, it is most unlikely you would be able to locate an installer that would be able to replicate the install 100%. Comes down to your needs and standards. With vinyl installers, especially if that is their core business, Satin Guard™ and clear bra installs are quite different. Search for a professional clear bra installer to obtain better results

 

Those wraps look amazing!

 

Just to make sure everyone understands, that not all installs are equal. Clear bra or Satin Guard (different from the various satin wraps on the market), the results shot by our company are not representative of all installers. Just because a company says they can perform "custom" installs does not mean that it would look like the photos shown in this thread. Due diligence is needed to ensure a quality install. Best thing to do, is to take a look at completed work on a vehicle.

On that note, here are more photos:

 

Manufacturer of this product is by Prestige Films. They are looking for dealer representation with Satin Guard and paint protection film dealers in Europe along with the UAE. Premier will be the exclusive training facility for Prestige. For those interested in becoming a Satin Guard or Clear Guard dealer, please contact Sara (sara.m@prestige-films.com)

 

YouTube - Premier GT2 RS 9500Ci TruStealth Display with Softouch

Just to detail what was done to this beautiful White GT2 RS:

1. Passport 9500Ci TruStealth Install. Custom display wrapped in real leather with Softouch buttom hidden behind leather.
2. Passport 9500Ci Custom Laser Diffusers front and rear. Front is mounted where it is very difficult to see (front bumper off) and rear bumper a customized bracket created just for the rear unit
3. Full Vehicle Satin Guard™
4. Diamond Cut IR 50 Sides / Rears + 73% Windshield - blocks off 94% of IR and 99.5% of UV

 

The cars look really nice!

Is it true, that once you remove this tape the paint job below should be perfect.Is there any risk to the paint? I have been thinking of doing a whole carbon or matt look for protection purpouses. Is there any anticipated problem with that? Is the car behind the rs a silver matt coating?

I mean something like this:

 

We have seen some of the matte vinyls on the market take off paint. This one of the reasons we do not carry or install vinyl. It is a product that has not been proven and was in its origination dedicated for lower end vehicles. In addition, with very few exceptions, most vinyl installers are used to installing film onto buses, fleet vehicles, etc. where paint cuts are not a concern. We dare venture to say, like paint protection film, with any fad, there will come repercussions in the coming years.

With that said, this is where Satin Guard™ stands out. There is a vast difference between Satin Guard™ and the various matte / satin vinyls on the market. Satin Guard™ is 2-3 times thicker than the vinyls on the market and have protective capabilities like "clear bra" or paint protection film.

Satin Guard™ does cost significantly more than the matte / satin vinyls on the market. Not only is it thicker, but the technology built into this product (Dual Tone Technology) makes it a much more durable film. Expect Satin Guard™ to last 7 years whereas vinyls will be between 2-3 years.

 

And to answer some commonly asked questions:

1. Where do you mount the front laser diffusers?
a. Front diffusers: Every vehicle is different. As for the GT2RS, it is actually not a DIY. Most companies would just mount the units with double sided tape in areas that are easy to mount, but would be quite visible to the naked eye. We created custom brackets so that the front laser diffusers are to be installed to be flush mounted.
b. Rear diffuser: Most passport 9500ci installs are just mounted on the two screws on the upper part of the license plate. Our rear diffuser is always integrated into the license plate frame, which means it is very difficult to spot.

2. How do you clean Satin Guard™?
A: We have a cleaner designed specifically for Satin Guard™

3. Can I purchase sheets of Satin Guard™ to install myself?
A: Most certainly

4. I cannot find anywhere on your website to place order. How do I proceed if I'm interested in buying?
A: Please contact us by phone: 510-623-1308