Has anyone ever sucessfully insatalled and lived with the electric "disapearing front plate" bracket? I am not sure if our cars are too low for this? I have a 2011 Turbo S?

Thanks in advance. If anyone had it installed can you please share the location of the switch and where you purchased the kit. If you oin the NY, LI area please also share installation location if you were happy.


Thanks,

 

I think you're going to have to mount a front plate in nys. I tried it without and got pulled over at the tunnel 3 times. Not worth it IMO.

 

Florida only requires a back plate. Hurts to see the puncture marks on cars from other states, but I wouldn't be risking being pulled over.

 

I would get the metal frame that screws into the toe hook if I had to mount a front plate.

http://www.moweraxle.com/

It's worth not having to put holes in my bumper...

I can't imagine the disappearing plate option is going to work for a 911tt since you're always scraping the lip as it is.

 

I would do the vinyl sticker plate look-a-like UK style... Copy, print on vinyl, affix, done. Not the best of surfaces for a laser gun so that WILL also most likely get you a ticket at some stage, but you wont be a "mile-away" target at first sight.

 

Why is this better than a regular plate?

 

+1. It's the best solution to having to mount a front plate. About $90.

 

If I go this route, the plate will block one of the laser shifters on my 9500ci. is there a way to move the plate up about 1 inch?

 

If you look at the plate on moweraxle.com you'll see there are several positions you can use to mount it. You could easily flip the plate and raise it 4-5".

 

Just ordered one just incase, thanks for the link.