997.1 TT Build Take 3
#108
I didn't do any long 5th and 6th gear pulls at high boost. I'm not sure what Anthony did when he had the kit on his car.
#109
My rods were also straight after similar power levels.
I attribute it to:
1) no long 5th gear pulls (99% of the time I let off in 4th)
2) careful control of boost (ramping it from peak TQ to rev limiter)
I attribute it to:
1) no long 5th gear pulls (99% of the time I let off in 4th)
2) careful control of boost (ramping it from peak TQ to rev limiter)
#110
i cant wait to see what mine look like, i have done 5th and 6th gear pulls to redline
__________________
#TeamAIM
997TT SilverSpool - 210.8 mph 1/2 Mile WR Apr 2019, 9.2 @ 168 mph 1/4 Mile Manual World Record , 3.15 60-130 mph , 2.72 100-150 mph , 1400whp E85
996TT SpoolBus - 204.6 mph 1/2 Mile 996TT WR Aug 2018, 9.5 @ 154 mph, 3.23 60-130 mph, 2.5 100-150 mph Manual Porsche World Record, 1400whp E85
997TT SlowBerry - 205.0 mph 1/2 Mile WR Nov 2018, 9.7 @ 170 mph 1/4 Mile , 3.2 60-130 mph , 2.4 100-150 mph , 1420whp E85
ESMOTOR | DO88 | TPC DSC | SYVECS | COBB | IPD | KLINE | XONA | AMS | ID | ERP | SACHS | TURBOSMART | CSF | DODSON |
#TeamAIM
997TT SilverSpool - 210.8 mph 1/2 Mile WR Apr 2019, 9.2 @ 168 mph 1/4 Mile Manual World Record , 3.15 60-130 mph , 2.72 100-150 mph , 1400whp E85
996TT SpoolBus - 204.6 mph 1/2 Mile 996TT WR Aug 2018, 9.5 @ 154 mph, 3.23 60-130 mph, 2.5 100-150 mph Manual Porsche World Record, 1400whp E85
997TT SlowBerry - 205.0 mph 1/2 Mile WR Nov 2018, 9.7 @ 170 mph 1/4 Mile , 3.2 60-130 mph , 2.4 100-150 mph , 1420whp E85
ESMOTOR | DO88 | TPC DSC | SYVECS | COBB | IPD | KLINE | XONA | AMS | ID | ERP | SACHS | TURBOSMART | CSF | DODSON |
Last edited by Mark @ AIM Performance; 01-13-2016 at 10:00 AM.
#117
I received all my engine parts last week. Here is an update. The long block is complete!
I'll get all the accessories installed this week. I'll hopefully have the clutch and turbo parts ASAP so I can get them mounted before installing the engine.
I'll get all the accessories installed this week. I'll hopefully have the clutch and turbo parts ASAP so I can get them mounted before installing the engine.