I'm working on a wot logs parser and also making it compatible with any log format but will require that you include either load or throttle to determine the WOT runs.

If nothing shows up for your log just message me with the URL link that I generated and I will look into it.

URL: https://logs.enclavenet.com/
Github: https://github.com/Enclavet/logsparser/

Changelog:
10/17/2018 - Added graphs for knock overlayed onto the timing graphs. Added MAF graphs.
10/16/2018 - Added initial support for AP logs now as I saw someone upload 2 of their logs.

Log formats:
Durametric
Accessport

Graphs:
IATs
Inj Duty Cycle
MAF
Act Boost vs Req Boost
Timing vs Knock
Lambdas

Requirements:
Logs must be in CSV format with the correct titles describing the data.
Must include Load or Throttle (TPS)

Examples:
https://logs.enclavenet.com/?logtype...3ae1fca93d.csv - Durametric log of my K24 Mafless 80lb 1.2bar tune.
https://logs.enclavenet.com/?logtype...7314bcdc41.csv - Accessport log for a log I found on the forums. Shows knock retard versus timing.


Graphs of key data are automatically generated from the detected WOT runs:

 

very cool! works for me. What specific situations of concern should I be looking for?

 

Not much, if you have any suggestions on more types of graphs to put in or if you have data logs that didnt parse anything, just post it here.