Brake Fluid Flush
Thread Starter
|
Registered User
Joined: Jun 2016
Posts: 46
From: Munich
Rep Power: 0
Brake Fluid Flush
Hi Guys,
i want to flush my brake fluid.
The preowner used Ap Racing 600, but i want to use a normal DOT 4.
Normally i flush without piwis, but in this case i think everything of the old should be removed, so how is the procedere for that?
I use this tool for flushing:
https://www.gl-gmbh.de/catalog/product/view/id/294716
i want to flush my brake fluid.
The preowner used Ap Racing 600, but i want to use a normal DOT 4.
Normally i flush without piwis, but in this case i think everything of the old should be removed, so how is the procedere for that?
I use this tool for flushing:
https://www.gl-gmbh.de/catalog/product/view/id/294716
Registered User
Joined: Oct 2010
Posts: 433
From: Bahrain
Rep Power: 65
You really need the piwis to bleed the ABS module, if you dont introduce any bubbles/let the res go dry when you chamge the fluid it wont be necessary.
Service manual calls for draining 250ml from each corner for a fluid change, if you want to be extra sure you flushed out all of the old fluid just flush larger amounts maybe 700ml-1L from each corner.
Good luck
Service manual calls for draining 250ml from each corner for a fluid change, if you want to be extra sure you flushed out all of the old fluid just flush larger amounts maybe 700ml-1L from each corner.
Good luck
Thread
Thread Starter
Forum
Replies
Last Post